- Blind-sysadmins - lists.hodgsonfamily.org

Google Cloud Directory Sync
by Anatoliy Shudrya 04 Aug '17

04 Aug '17

Hello everyone, Any google admins out here? Anybody have tried to use google cloud directory sync? I am trying to sync my AD with G Suite domain but this application is not accessible at all. I have tried JAWS, NVDA, Narrator, nothing seems to read even single word. Best Regards Anatoliy

1 0

SCCM - feedback - Accessibility topic.
by Darragh Ó Héiligh 01 Aug '17

01 Aug '17

Hello all, I need to draw your attention to the System Center Configuration Manager feedback site and specifically the topic of accessibility. This feedback item has been marked as complete but in my opinion, as there are outstanding accessibility issues in 1702 - untested but unconfirmed as fixed in 1706, the topic should remain a very active area of discussion within this team. As my SCCM implementation really starts to grow legs and we're trying to do a lot more with it, the reports are really letting me down. I have no real way of finding out how my application or update deployments are going. This kind of thing needs to be addressed. I have asked on this feedback item that it be kept open. I ask those of you who can to echo this request. Mark and his team have done an exdceptional job. I can't express enough how much I appreciate it but I think they may be closing this without getting everything finished and that would be a shame for those of us who are spending a lot of time in SCCM. The address to the feedback item is here: https://configurationmanager.uservoice.com/forums/300492-ideas/suggestions/… Regards Darragh

2 1

SCCM - feedback - Accessibility topic.
by Darragh Ó Héiligh 31 Jul '17

31 Jul '17

Hello all, I need to draw your attention to the System Center Configuration Manager feedback site and specifically the topic of accessibility. This feedback item has been marked as complete but in my opinion, as there are outstanding accessibility issues in 1702 - untested but unconfirmed as fixed in 1706, the topic should remain a very active area of discussion within this team. As my SCCM implementation really starts to grow legs and we're trying to do a lot more with it, the reports are really letting me down. I have no real way of finding out how my application or update deployments are going. This kind of thing needs to be addressed. I have asked on this feedback item that it be kept open. I ask those of you who can to echo this request. Mark and his team have done an exdceptional job. I can't express enough how much I appreciate it but I think they may be closing this without getting everything finished and that would be a shame for those of us who are spending a lot of time in SCCM. The address to the feedback item is here: https://configurationmanager.uservoice.com/forums/300492-ideas/suggestions/… Regards Darragh

1 0

upgrade a windows server from 2012 to 2016
by mattias 30 Jul '17

30 Jul '17

lets say you have a vps with win server 2012 you will upgrade it to 2016 are it possible seems in place upgrade require dvd or something

5 13

administer a windows server with microsoft remote desktop client for android
by mattias jonsson 30 Jul '17

30 Jul '17

Anyone tryed this? With a physical keyboard Skickades från E-post<https://go.microsoft.com/fwlink/?LinkId=550986> för Windows 10

1 0

administer a windows server with microsoft remote desktop client for android
by mattias jonsson 30 Jul '17

30 Jul '17

Anyone tryed this? With a physical keyboard Skickades från E-post<https://go.microsoft.com/fwlink/?LinkId=550986> för Windows 10

1 0

Is SCCM good for smaller environments?
by Katherine M. Moss 18 Jul '17

18 Jul '17

Hey all, Not dealing necessarily with accessibility at all, but speaking of SCCM, is it good for the smaller environment? I'm curious because right now, the best we've been able to come up with is a combination between WDS, Otter, and WSUS for deployment and orchestration; well, Otter would have been used for Orchestration regardless simply because it's easier than Scorch to set up. My question is, though, does SCCM offer anything in the way of advantages over the cobbled together solution we have? Any reason why I should push SCCM? Resources are lower than we'd like, so right now, we're stuck with what we've got until we can get more (though between the four of us, we do manage to have about seven physical servers between local and offsite resources (though some of them are older and are being phased out.) one of the things that drives me insane with Microsoft software is the amount of Ram one single product takes . That's so far what's keeping us away; others in my group say, why use SCCM when something cobbled together takes less resources and works just as well?

2 3

OpsView Atom VS. SCOM
by Katherine M. Moss 18 Jul '17

18 Jul '17

Hi all, I'm curious about this. All of our hardware is either Dell (for servers and storage) and Ubiquiti (for networking). Dell, being the awesome vender they are, have one of the most comprehensive management platforms I've ever seen in OpenManage. The point here is . seemingly, I've not been able to find an opsView plugin that connects with OME/OMSA/OMCI at all . SCOM has one, but is awfully resource intensive (I think?) for only about 20 or so VMs (more are stood up all the time considering experiments are occurring all the time around here.) Any advantages with OpsView over SCOM either for accessibility, resource usage, or others? Any reason we should ditch OpsView for SCOM? SCOM seems to have more integrations with other products than OpsView does.

2 3

SCCM, In case no one saw this
by Fermin, German 18 Jul '17

18 Jul '17

[configurationmanager.uservoice.com] Admin response: 'Please improve accessibility of SCCM ...' Welcome to Configuration Manager Feedback configurationmanager.uservoice.com Admin response An idea you support has been updated: 124 votes started +3 votes Please improve accessibility of SCCM for blind system administrators. started We think this has been improved substantially and would love to get your feedback. The latest 1706 technical preview has significant changes from an accessibility perspective. Please give it a try and let us know your feedback, https://docs.microsoft.com/en-us/sccm/core/get-started/capabilities-in-tech…. Best Mark Mark Silvey - ConfigMgr Product Team Admin, System Center Configuration Manager If you would like to stop receiving these emails you may unsubscribe. Virus-free. www.avg.com #DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2

5 14

VPN - L2TP and the Virgin Hub 3 (and perhaps BT)
by George Bell 17 Jul '17

17 Jul '17

If you do not use VPN - hit delete now. Having installed a new Server running Windows Server 2016, our latest problem has been VPN communication from home to the office. PPTP worked just fine, but Server 2016's Best Practices Advisor (BPA) said that we should be using a higher level of security communication. Setting up L2TP, the minimum advised, failed. I'll spare those details for now, but if you try and fail, and also have Virgin's Hub 3, forget it. It simply will not ever work - officially. There is a solution, but that involves purchasing a router (a wireless one if you need that too), at your own expense, to connect to the Virgin Hub 3. You then have to configure the Hub 3 as a Modem, and go from there. Virgin did once support L2TP, but they have removed the option. The Virgin user lists are full of IT managers who, since at least January this year, are complaining the their home workers have the problem, and that they are forced to open the PPTP server option. And if you have the same with British Telecom, do not be surprised if you have the same problem. A colleague needing access to our server contacted BT, and the two support people he spoke to in Delhi (or was it Bombay), did not even know what L2TP was. He solved it himself but I don't have details. With Internet Security a top priority, especially for businesses, I am staggered about this! George.

7 7

Accessible TOTP tools
by Jason White 16 Jul '17

16 Jul '17

Several Web sites that I use offer Time-Based One-Time Passwords (TOTP - RFC 6238) as the second factor in a two-factor authentication scheme. To manage TOTP and to create the six-digit time-based codes that need to be entered during the authentication process, I'm using oathtool under Linux, which is excellent: it's a command line tool, and one can easily write a shell script to generate the codes. I've tried FreeTOTP under iOS, but it isn't very accessible. What other tools (for various operating systems) have you found useful for this purpose?

2 2

Low latency sound in virtual machines.
by Darragh Ó Héiligh 16 Jul '17

16 Jul '17

My ideal setup would be to run a really simple Linux desktop with no GUI on this workstation and fire up VM's for my guest machines but when I've tried to do this, I encounter too many issues with performance even on a really beefy system. Many of these performance issues seem to be perceived and not actually happening. I'm perceiving them because the screen reader I'm using is lagging just slightly behind me compared to standard use. This really well written article suggests ways around this but I'm not sure if I'm going to invest the time into researching it's suitability for my particular situation. https://blog.bryansmart.com/2012/02/16/low-latency-sound-for-vmware/ I use Windows 10 for everything from system administration, .net development, testing and audio editing. I want Linux at the core because when it's just running the console, it just works. I've never had a Linux system fail on me for software reasons when it's just running for this purpose. If I'm using virtual machines, I can easily create and restore from snapshots when needed. The workstation is a strong spec: 2 8 core Xeon processors: 64GB RAM A high speed SSD RAID Array system that I really don't understand. It's using 2 SSD disks enclosed in one case with a RAID controller. I've one 1TB SSD data disk Then another few 2TB data disks. Just for the fun of it, there's an Nvidia Geforce GTX970 graphics card Finally a Sound blaster ZXR DB Pro card I built this machine for the purpose of running VM's but for various reasons, it's never really been able to do it. Mainly because of screen reader issues.

2 1

Low latency sound in virtual machines.
by Darragh Ó Héiligh 16 Jul '17

16 Jul '17

My ideal setup would be to run a really simple Linux desktop with no GUI on this workstation and fire up VM's for my guest machines but when I've tried to do this, I encounter too many issues with performance even on a really beefy system. Many of these performance issues seem to be perceived and not actually happening. I'm perceiving them because the screen reader I'm using is lagging just slightly behind me compared to standard use. This really well written article suggests ways around this but I'm not sure if I'm going to invest the time into researching it's suitability for my particular situation. https://blog.bryansmart.com/2012/02/16/low-latency-sound-for-vmware/ I use Windows 10 for everything from system administration, .net development, testing and audio editing. I want Linux at the core because when it's just running the console, it just works. I've never had a Linux system fail on me for software reasons when it's just running for this purpose. If I'm using virtual machines, I can easily create and restore from snapshots when needed. The workstation is a strong spec: 2 8 core Xeon processors: 64GB RAM A high speed SSD RAID Array system that I really don't understand. It's using 2 SSD disks enclosed in one case with a RAID controller. I've one 1TB SSD data disk Then another few 2TB data disks. Just for the fun of it, there's an Nvidia Geforce GTX970 graphics card Finally a Sound blaster ZXR DB Pro card I built this machine for the purpose of running VM's but for various reasons, it's never really been able to do it. Mainly because of screen reader issues.

1 0

New Suggestion raised for accessibility of Atlassian HipChat desktop client
by Katherine M. Moss 15 Jul '17

15 Jul '17

Hey all, I love this thing (I actually use it for personal tech projects; wish it were used at my job) though it's got some major accessibility issues; namely that the desktop client works with neither JAWS nor NVDA, and in the wweb client,, you can't make one to one video calls unless using JAWS for some stupid reason. The following link needs some more votes in order to get it raised in importance. I figured I could get some support from the awesome folks here. I'll be sending this around to other places, and it's out on Twitter as well: https://jira.atlassian.com/browse/HCPUB-3262 <http://support-mail-links.atlassian.com/track/click/11828703/jira.atlassian .com?p=eyJzIjoiWnJIbE1jcFVGSzFickJrWFJkVkVvUkMwc3FZIiwidiI6MSwicCI6IntcInVcI joxMTgyODcwMyxcInZcIjoxLFwidXJsXCI6XCJodHRwczpcXFwvXFxcL2ppcmEuYXRsYXNzaWFuL mNvbVxcXC9icm93c2VcXFwvSENQVUItMzI2MlwiLFwiaWRcIjpcImMzNTk5MGY5MDZjYjQzMzZiZ DdiOTc4NjBmYzkwYzFmXCIsXCJ1cmxfaWRzXCI6W1wiNWVjODVhOGQwZGE2ZDMzMTNjYmUxNTFlN mIwN2YyY2ExODY1ZmE1ZlwiXX0ifQ> Thanks, guys.

2 3

Enterprise Password Management
by Fermin, German 13 Jul '17

13 Jul '17

Hello everyone, My school is starting to look into an enterprise password management solution. Since I will have to support and also use it, wanted to know if anyone had any experiences with any of them with screen readers. Both good and bad. Some of the venders we're looking at: Thycotic, Cyberark, Entrify, One Identity. Most look like they are web interfaces which of course can range widely when it comes to accessibility. German Purchase College

4 7

some Deployment and remote questions please?
by Zameer Mahomed 13 Jul '17

13 Jul '17

Hello Listers, I'd like to know, would it be possible to officially configure a PE with Narrator preinstalled? I've tried finding documentation in the windows ADK 1703 but have found nothing concerning Narrator. Currently, we boot from the network to install a preconfigured OS, where booting from the network and selecting an OS is not accessible to me at this moment. I could use an unattend option, for now, but I'd like to know if there are other methods? Secondly, as part of support, we often have to help users remotely. I have seen a few threads here concerning NVDA remote and team viewer, but I'm not sure how to setup a working solution. Are there any guides available please? I've noticed that they also make use of remote desktop. Would NVDARemote still work for this program as well? Or would it be better to install jaws and make use of Tandom? Lastly, If I were to place a portable copy of NVDA on a share and run it when I help various people, as aposed to always carrying a flash around, Is there a commandline option to be able to run NVDA as an administrator?\ I apologize for the beginner questions. Kind Regards

3 6

Starting NVDA or Narrator from command prompt or power shell?
by Jen Bottom 10 Jul '17

10 Jul '17

Hi everyone, I am still on my quest to be able to set up a Windows Box with Vagrant, that is provisioned with NVDA and that will provide some sort of speech output once the provisioner has run. I have now managed to get the provisioner to run on a Windows10 box, after messing about with 'winrm' for a while. This script installs the NVDA package using 'choco'. I don't think it's the latest but better than nothing. However NVDA does not automatically start once the package is installed. Note currently I don't have access to a physical box running Windows that I can test stuff out on. I am looking for a way to start either NVDA or Narrator from the command prompt or power shell, so I can at least get some feedback. I have tried going to the VM GUI and using the NVDA short cut key as a quick work-around, but nothing seemed to happen. Also as I am being lazy and not building my own Vagrant box, a quick way to enable Audio if it is disabled is appreciated. I think it is available on the box I have, but I may play with different Windows boxes in the future. Thanks in advance for any suggestions, Jen!

5 7

Windows Subsystem for Linux: copying/pasting accessibly in the terminal
by Jason White 06 Jul '17

06 Jul '17

The Windows Subsystem for Linux doesn't provide keyboard commands for copying or pasting text into its terminal, which is not the same as the PowerShell console (for example, it supports full terminal emulations for ncurses applications). See the GitHub issue at https://github.com/Microsoft/BashOnWindows/issues/235 I hope this is prioritized and fixed. Meanwhile, does anyone here have a work-around?

2 5

Re: [Blind-sysadmins] [program-l] Re: Code compare - I have found a solution
by Chamandeep Singh Grover 05 Jul '17

05 Jul '17

Hello, Yes, I did try your suggestion. However it did not work for me. Perhaps I did not set it up correctly, but I was not able to easily identify the changes, and switch between the two windows. Maybe I will try it again when I have some time. Thank you, Chamandeep Singh Grover Sent from my iPhone > On 5 Jul 2017, at 19:09, Rodney Haynie <RodneyH(a)InfoMC.com> wrote: > > Hmmm, maybe I will load this up in the future and give it a whirl. But did you actually try Win Merge that I suggested. There are keystrokes for all of the comparison and merge actions. The keystrokes are listed in the Help menu very accessible for screen readers. > When changing between code windows, the lines remain in sync. > I use my screen reader's (JAWS) font color keystrokes to identify the beginning and end of a large block of modified code, (when I have it set to display non-modified lines). > As I merge in the changes, from left to right, or right to left, depending on what I want, the count of changes decrease. I know this by telling my screen reader to read the status bar. > It sounds like Win Merge will do all you want, including staying in sync between code windows. But if you already tried it and something else was a hold back, then sorry. I just wanted to make sure you saw my response to your post a while back. > Take care. > Rodney > > -----Original Message----- > From: program-l-bounce(a)freelists.org [mailto:program-l-bounce@freelists.org] On Behalf Of Chamandeep Singh Grover > Sent: Wednesday, July 5, 2017 12:17 PM > To: program-l <program-l(a)freelists.org>; Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> > Subject: [program-l] Code compare - I have found a solution > > Hi All, > Some time back I wrote on this list to ask whether there was an accessible solution for comparing code in visual studio. Well, now I think I have found something that works quite well. The best i've seen so far to be honest. > The comparison tool is called Code compare. > https://www.devart.com/codecompare/ > Once set up, you can move between the source and target files using control 1 and control 2. move to the next and previous differences with alt + up/down arrows. > and replace content from one file to other by using alt + left/right arrow keys. > The only thing that doesn't automatically happen for screen readers is when you switch to the other window, the line numbers are not in sync. > So you have to ensure you find the correct matching lines by doing the same number of next difference keystrokes on both sides. > > Please give this a go and let everyone know your findings. > I am very excited about this as resolving conflicts has been a major blocker to my work on almost a daily basis. > > Hope this helps. > > Kind regards, > Chamandeep Singh Grover > ** To leave the list, click on the immediately-following link:- > ** [mailto:program-l-request@freelists.org?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** program-l-request(a)freelists.org > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:program-l-request@freelists.org?subject=faq] > ** or send a message, to > ** program-l-request(a)freelists.org with the Subject:- faq > ¢Wš½ëazX¬µÉbrJ'¶¢šg‰«^—'è–Z0Šx%Šy&j)m¢šè‚¶¦–·ª¹ë-~·ž–+-²Šà²æãyËnžË›±Êâmâ¶¬–)äv‡¬žÜ(®Kaz{Ö¦zËëh¦º ©¥ê®zË_ç¥ŠËl¢¸Ø§¶’¹¸ÞrÙbër¥ë§²æìr¸›xZ+¢Ø^®X¬µÊ&™©Ý²Ëœ…«/iÆŠ‰æ¡×œ–'$¢{az)¦yØšµér~‰e£§‚X§’f¢–Ú)®ˆ+jikz«ž²×ëyéb²Û(®.n7œµöª¢»Ö¦zËëh¦º ©¥ê®zË_ç¥ŠËl¢¸0ŠØm…ä®n7œµöª

1 0

Code compare - I have found a solution
by Chamandeep Singh Grover 05 Jul '17

05 Jul '17

Hi All, Some time back I wrote on this list to ask whether there was an accessible solution for comparing code in visual studio. Well, now I think I have found something that works quite well. The best i've seen so far to be honest. The comparison tool is called Code compare. https://www.devart.com/codecompare/ Once set up, you can move between the source and target files using control 1 and control 2. move to the next and previous differences with alt + up/down arrows. and replace content from one file to other by using alt + left/right arrow keys. The only thing that doesn't automatically happen for screen readers is when you switch to the other window, the line numbers are not in sync. So you have to ensure you find the correct matching lines by doing the same number of next difference keystrokes on both sides. Please give this a go and let everyone know your findings. I am very excited about this as resolving conflicts has been a major blocker to my work on almost a daily basis. Hope this helps. Kind regards, Chamandeep Singh Grover

1 0

Code compare - I have found a solution
by Chamandeep Singh Grover 05 Jul '17

05 Jul '17

Hi All, Some time back I wrote on this list to ask whether there was an accessible solution for comparing code in visual studio. Well, now I think I have found something that works quite well. The best i've seen so far to be honest. The comparison tool is called Code compare. https://www.devart.com/codecompare/ Once set up, you can move between the source and target files using control 1 and control 2. move to the next and previous differences with alt + up/down arrows. and replace content from one file to other by using alt + left/right arrow keys. The only thing that doesn't automatically happen for screen readers is when you switch to the other window, the line numbers are not in sync. So you have to ensure you find the correct matching lines by doing the same number of next difference keystrokes on both sides. Please give this a go and let everyone know your findings. I am very excited about this as resolving conflicts has been a major blocker to my work on almost a daily basis. Hope this helps. Kind regards, Chamandeep Singh Grover

1 0

Starting NVDA or Narrator from command prompt or power shell?
by Jen Bottom 29 Jun '17

29 Jun '17

Hi everyone, I am still on my quest to be able to set up a Windows Box with Vagrant, that is provisioned with NVDA and that will provide some sort of speech output once the provisioner has run. I have now managed to get the provisioner to run on a Windows10 box, after messing about with 'winrm' for a while. This script installs the NVDA package using 'choco'. I don't think it's the latest but better than nothing. However NVDA does not automatically start once the package is installed. Note currently I don't have access to a physical box running Windows that I can test stuff out on. I am looking for a way to start either NVDA or Narrator from the command prompt or power shell, so I can at least get some feedback. I have tried going to the VM GUI and using the NVDA short cut key as a quick work-around, but nothing seemed to happen. Also as I am being lazy and not building my own Vagrant box, a quick way to enable Audio if it is disabled is appreciated. I think it is available on the box I have, but I may play with different Windows boxes in the future. Thanks in advance for any suggestions, Jen!

1 0

Protection against malware on a new Windows 10 system
by Jason White 29 Jun '17

29 Jun '17

As noted previously on this list, I recently purchased a new laptop, which is intended to run both Linux and Windows. On the Windows side, I need to guard against viruses and other forms of malware. Whatever solution I put in place has to be accessible with a screen reader. I have some system administration experience (with my own machines and, occasionally, helping others - almost entirely under Linux), so I'll take the obvious precautions - keeping the system and applications up to date, only installing software from reputable sources, etc. In other words, I won't make the obvious mistakes that people who don't know any better tend to make. Currently, Windows Defender is running by default. In the reviews I've read, it has been criticized for its virus detection accuracy, but those reviews aren't necessarily recent. What are others doing and recommending at the moment?

7 10

Screen sharing question
by Christian 26 Jun '17

26 Jun '17

Hi, I want to share my computer screen, especially one program window with a sighted person. However, since I don't know him that well, I want only to share the screen and so he does not have the ability to control it. Is Teamviewer The best solution do you think if you set up limitations in it? Many thanks, Christian

2 3

letsencrypt
by David Mehler 21 Jun '17

21 Jun '17

Hello, Does anyone have experience with letsencrypt on a unix-based system and an apache web server? I'm using the acme-client and trying to get certificates, now one run worked for one of my domains, the other reports a bad exit status. I'd appreciate any help, I'm rather frustrated. Thanks. Dave.

2 1