Dave, Are you sure? You should be able to install ethernet (cat5e/cat6) cabling (through the wall, to a patch panel) with keystone jacks to connect your WAPs. The spec allows for 100 m of cable, and you might already have it installed (but with telephone instead of ethernet at both ends). Bill
On 21 Aug 2018, at 12:50, David Mehler <dave.mehler@gmail.com> wrote:
Hi Bill,
Thanks for your reply. The two routers are definitely not close enough for an ethernet connection between the two. What about a wds setup? Would that work? I was hoping that the repeater would repeat the signal from router1 including the SSID.
Thanks. Dave.
On 8/20/18, Bill Dengler <codeofdusk@gmail.com> wrote:
For this sort of thing, I think you may need a different SS ID. If the routers were connected by ethernet (which is a better solution), you could set the second one up as a wireless access point and mirror the SS ID.
Bill
Sent from my iPhone
On Aug 20, 2018, at 20:26, David Mehler <dave.mehler@gmail.com> wrote:
Hello,
I've got an issue with a repeater router it's not repeating.
My setup is a cable modem, going to an ISP-provided router, (I'll be getting rid of that and it's not relevant), and an Asus RTN66U running dd-wrt daisy chained on to the isp-provided router. To this setup I've got a multi-story home and want to add a repeater. So on the second floor I've got another Asus RTN66U also running dd-wrt that I'm trying to get to repeat the signal from the other router. On the second floor router i've turned on repeater-bridge mode in case I want to hook a client in via ethernet, and set wan connection type to disabled. Under security i've turned off everything as security should be handled by the primary router. I've also switched from AP to repeater-bridge. In the wireless configuration i'm eventually wanting to repeat both the 2.4 and 5GHZ signals, but for now am only trying to get the 2.4 going. All those settings match the primary router, SSID, channel, WPA2 key, etc.
Currently I have an ethernet plugged in to the second router and am trying via wireless to obtain a dhcp address from the primary router which they should be talking.
Does anyone have any suggestions?
Thanks. Dave. _______________________________________________ Blind-sysadmins mailing list -- blind-sysadmins@lists.hodgsonfamily.org To unsubscribe send an email to blind-sysadmins-leave@lists.hodgsonfamily.org
Blind-sysadmins mailing list -- blind-sysadmins@lists.hodgsonfamily.org To unsubscribe send an email to blind-sysadmins-leave@lists.hodgsonfamily.org
_______________________________________________ Blind-sysadmins mailing list -- blind-sysadmins@lists.hodgsonfamily.org To unsubscribe send an email to blind-sysadmins-leave@lists.hodgsonfamily.org