Sorry for the double post, but I forgot to mention that flashnul is my preferred program to write the image to the card under Windows. On 10/14/14, Ben Mustill-Rose <ben@benmr.com> wrote:
Hi,
Just buy a model B or B+, write the Raspbian image to an SD / micro SD card, put it in the pi & turn it on. After a while, assuming you have ethernet connected, use your rooter to determin the ip that it's been given & just SSH to it - user:pi & password:raspberry
Once you have access, I would expand the file system using raspi-config then update the firmware using rpi-update. Finally remember to do an apt-get update & an apt-get upgrade to make sure everything's up to date. You will have to sudo for everything & by default root is locked down. If you really want propper root then type sudo passwd.
Cheers, Ben.
On 10/14/14, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
I use one as a sandbox; I don't connect anything to it, it just runs Linux and I swap out the cards for different projects. Not what it is really meant for, as I don't use the IO connector, but it works fine.
Use Raspbian with the images and not the SD card from raspberrypi.org as that one has a graphical install part which hampers SSH access on first boot.
Andrew.
-----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Greg B. Sent: 14 October 2014 18:07 To: 'Blind sysadmins list' Subject: [Blind-sysadmins] Raspberry Pi
Hello all,
I would like to get started with Raspberry Pi. Can anyone give me pointers on how to get started and what I should look for in a Raspberry Pi device?
Thanks,
Greg B.
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/blind-sysadmins