Hi, What kit do you have here? I had a similar setup with a Cisco device doing static NATting for specific internal IP addresses, then one address for the PAT (catch-all) NAT. So for example I had: 192.168.1.1 (router/default gw) 192.168.1.1 (server) 192.168.1.3 (server) 192.168.1.4 (printer) 192.168.1.8 (phone) 192.168.1.10... (start of DHCP range) On the outside I had external addresses 81.2.105.208/24 with the router on 81.2.105.209. I used static commands so when 192.168.1.2 went onto the Internet it got the IP address 81.2.105.210 and the same with 192.168.1.3 getting 81.2.105.211, and the phone got 212. Everything else coming out of the system got 81.2.105.209 as that was the PAT address. This was on a Cisco ASA but other routers can do this. Andrew. -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of MIKE Sent: 01 February 2013 18:10 To: blind-sysadmins@lists.hodgsonfamily.org Subject: [Blind-sysadmins] multiple static ip and same nat Hi, I have 14 static ips. I am setting cirtain systems up with static ips but have things like apple tvs etc on the nat and I need to beable to have all the static see them using linux. Any ideas? _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/blind-sysadmins