Or simply use iso to usb Skickades från E-post<https://go.microsoft.com/fwlink/?LinkId=550986> för Windows 10 Från: Ryan Shugart via Blind-sysadmins<mailto:blind-sysadmins@lists.hodgsonfamily.org> Skickat: den 19 januari 2017 22:50 Till: Blind sysadmins list<mailto:blind-sysadmins@lists.hodgsonfamily.org> Kopia: Ryan Shugart<mailto:ryshugar@microsoft.com> Ämne: [Blind-sysadmins] Windows PE with Narrator Hello everyone: The ISO images for the Windows 10 insider build with talking install have been posted. You can download them at this link: https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewadvan... Note that you do need to be in the Windows Insiders program to access these images, membership is free with a valid copy of Windows. These ISOs are accessible regardless of if you are on the slow or fast ring. The instructions are below, please note that as you will be playing with the Windows installation process, I recommend not doing this on your primary machine unless you have a really really good backup. AKA, do this on a VM or a test machine if at all possible. a. Download the Windows 10 Media Creation tool from https://www.microsoft.com/en-us/software-download/windows10 b. From that page, follow the instructions for creating bootable media to install Windows on another computer. You will need a USB drive at this point. This process will format the drive appropriately, download a copy of Windows 10 and put all the files on the USB drive. Note these are not the files you will ultimately use but this step gets your USB drive ready. c. When this process is done, open the USB drive in File Explorer and delete all the files. d. Now download the 15002 ISO file and open it in File Explorer. e. Copy all the files from the 15002 ISO you just opened to your USB drive. f. If you want to use a newer ISO down the road, just repeat steps C, D, and E here. That is, update your bootable media with newer files. g. If you want to use diskpart instead of the Media Creation tool to make the bootable USB with ISO, instead of steps a,b, & c above, the following commands will delete all files on the USB and make it bootable: i. Open the command prompt ii. Type: diskpart iii. Type: list disk iv. This will show all connected disks, their disk numbers, connection status and disk size v. Using the sizes, determine which disk is your USB drive and remember its disk number (i.e. Disk 2) vi. Type the following commands: (where X is the disk number of your USB drive) 1. sel dis X 2. clean 3. cre par pri 4. active 5. format fs=FAT32 Quick 6. exit h. Once the disk is formatted and prepared, you can copy the Windows installation files onto the disk from the ISO. 4. Install Windows a. Once your Computer is set to boot using the new drive and you have the USB bootable drive with the ISO image ready, insert the bootable USB drive and power on the PC. i. Ideally have a USB headset connected, although we've found Surface Pro speakers and onboard sound from several other computers will also work. b. Wait about 10-15 seconds and then press CTRL+Win+Enter to start Narrator. If you hear Narrator talking, you will be good to go. If you do not, try other USB audio hardware. To be clear, there are some configurations that will not work at this point. If you hit a point where audio won't work, power the PC off, remove the USB drive and power the PC back on. You should be back in your copy of Windows that was previously installed. c. Follow the questions and process for installing Windows. i. When you are asked to choose a partition, the best one to use will likely be selected by default. To read partition sizes, use Narrator table reading commands of CAPS+F3 and CAPS+F4. Caps+F3 will read a row cell by cell where you will hear the details about the selected partition. ii. Since you are likely installing on to a partition that has already had windows, you can pick between formatting the partition or not. If you do not format, you'll get a message about an existing copy of Windows already being present and saying that will be moved to Windows.old. You are not able to restore this but your files and such will be in there. Do not rely on this as a guarantee that you can get your files. iii. If you encounter something saying rich text, use Narrator's caps+m to read the text. iv. Pay close attention once the install starts. You'll hear a message about preparing installation repeated multiple times. You'll then hear a prompt talking about a restart. It is important you remove the USB drive at this point or you will start the entire process over. d. Wait about 30-60 seconds after the restart and press ctrl+win+enter again to start Narrator. You are now going through more of the typical setup. Note that this build 15002 also has a feature where you can try and use Cortana to answer some setup questions. You can try this out also. Ryan Shugart Program Manager II, Cloud+Enterprise Accessibility Microsoft Corporation 425-705-1262 _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins