Hi, I found this in my tech docs. I can't remember who wrote it for me but you may find it useful. Once you have Spinrite on a CD you can do the following: 1 Boot from CD. 2 Press any key twice. 3 Then press number 2 on the keyboard. 4 Press number 1 to select drive partition. 5 Press SPACEBAR to select all drive partitions and press ENTER. 6 Then press ENTER once more to begin to scan. This will do a level 2 scan on the drive (data recovery). Remember nothing is absolute and depending on how bad the drive is this may take a while. It will finish when it is done type of thing. This utility is designed also for more regular maintenance which is generally recommended from time to time. Good luck! -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: 26 August 2015 09:35 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Spinrite accessible? Hi, Spinrite is a DOS application and so will need a DOS screen reader to work. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of David Mehler [dave.mehler@gmail.com] Sent: 26 August 2015 07:40 To: blind-sysadmins Subject: [Blind-sysadmins] Spinrite accessible? Hello, I've got a hard drive that I know has issues windows disk check tells me so and from what it's been putting me through I have no doubt. I'm wanting to use spinrite on it. I am wondering if anyone has figured out how to make spinrite talk? I know the native interface does not. Thanks. Dave. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins