Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"*
Hi, PuTTY should be working for you but you need to use the JAWS cursor to read out the text. I had this exact setup with RDP for a while and it worked ok. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists.hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
Hi, PuTTY should be working for you but you need to use the JAWS cursor to read out the text. I had this exact setup with RDP for a while and it worked ok. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists.hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran. On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"*
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model. On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
Hello, You can download Jaws scripts for Putty from following link: https://github.com/munawarb/JAWS-PuTTY-Scripts Regards. 2017-10-14 17:27 GMT+03:00, Steve Matzura <sm@noisynotes.com>:
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model.
On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Can Kırca
Thank you for the link, this will be useful, lately I’ve had to work with DO droplets and their web console terminal is not accessible at all. Putty was first one on the list to access servers with. -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Can Kirca Sent: Saturday, October 14, 2017 11:45 AM To: Blind sysadmins list <blind-sysadmins@lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] JFW reading terminals Hello, You can download Jaws scripts for Putty from following link: https://github.com/munawarb/JAWS-PuTTY-Scripts Regards. 2017-10-14 17:27 GMT+03:00, Steve Matzura <sm@noisynotes.com>:
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model.
On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Can Kırca _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
Thank you for the link, this will be useful, lately I’ve had to work with DO droplets and their web console terminal is not accessible at all. Putty was first one on the list to access servers with. -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Can Kirca Sent: Saturday, October 14, 2017 11:45 AM To: Blind sysadmins list <blind-sysadmins@lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] JFW reading terminals Hello, You can download Jaws scripts for Putty from following link: https://github.com/munawarb/JAWS-PuTTY-Scripts Regards. 2017-10-14 17:27 GMT+03:00, Steve Matzura <sm@noisynotes.com>:
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model.
On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Can Kırca _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
Thanks, Can. Very useful and informative. On Sat, 14 Oct 2017 21:44:35 +0300, you wrote:
Hello,
You can download Jaws scripts for Putty from following link: https://github.com/munawarb/JAWS-PuTTY-Scripts
Regards.
2017-10-14 17:27 GMT+03:00, Steve Matzura <sm@noisynotes.com>:
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model.
On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
Hello, You can download Jaws scripts for Putty from following link: https://github.com/munawarb/JAWS-PuTTY-Scripts Regards. 2017-10-14 17:27 GMT+03:00, Steve Matzura <sm@noisynotes.com>:
This has been a real thorn in our collective sides for a couple decades now. Back in DOS days, Vocal-Eyes was the best at this task, even when using that old thing, what was it called? Nethook, something like that. It read anything you could Telnet or ssh into flawlessly. I can't believe this has not been remedied in twenty years plus,since there are so many of us, admins and non-, who need to log in to services that use the terminal model.
On Thu, 21 Sep 2017 15:10:15 +0100, you wrote:
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran.
On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Can Kırca
Cheers, it was working with the JAWS curser but I was sure there was a way to get the terminal to read properly like it does with NVDA. Kind regards, Kieran. On 21 September 2017 at 15:07, Andrew Hodgson <andrew@hodgsonfamily.org> wrote:
Hi,
PuTTY should be working for you but you need to use the JAWS cursor to read out the text.
I had this exact setup with RDP for a while and it worked ok.
Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces@lists.hodgsonfamily.org] on behalf of Kieran Little via Blind-sysadmins [blind-sysadmins@lists. hodgsonfamily.org] Sent: 20 September 2017 10:59 To: blind-sysadmins@lists.hodgsonfamily.org Cc: Kieran Little Subject: [Blind-sysadmins] JFW reading terminals
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
_______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
-- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"*
Install secure CRT on the far end and add the JFW script, I think it’s Chris Nestrid (I’m sure I’m spelling his name wrong I’m sorry) but if memory serves he came up with a very simple but nice script to have the responses in ssh read for you. The other advantage of Secure CRT is that you can use it as a serial terminal (as you can putty) but get that output read directly. You can also disable this feature with the script on the fly and reenable so for example is long streams of data are flowing by you don’t care about you can skip the reading and have a hot key to restart again when you’re ready. Other operating systems are also good for ssh but I’m not sure about this jump box you’re working with and if that’s the only means to gain access. Where I work we have a VPN we can join and then access everything directly. As a side note, I’m a network engineer of about 27 years now and have a good Cisco background as well as worked for Juniper directly and also have very strong Palo Alto, F5 and Tallari skills to name a few. I you have any questions at all about networking or Cisco specifically please don’t hesitate to ask, I’m happy to help and there are also several other active very skilled network engineers on this list who have helped me in the past. Ask away and we’ll be glad to help if we can.
On Sep 20, 2017, at 5:59 AM, Kieran Little via Blind-sysadmins <blind-sysadmins@lists.hodgsonfamily.org> wrote:
Hi, Not sure if this is the best place to ask this but it's the only list I'm subscribed to. I'm supposed to be working with a lot of cisco equipment at the minute, through SSH and terminal sessions. I'm using JFW since it was bought for me, all of our cisco equipment requires you to be on a remote server to configgure it and I can't use NVDA remote anyway because of firewalls, ETC. I've got JFW working fine remotely, but either on the local JAWS or remote JAWS I can't get it to read terminals. I'm using both PUTTY and tera term. It reads CMD fine just not terminals. Are there any special settings ETC I need to change? Cheers for any help. Kind regards, Kieran. -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF tel: 01670623699 Email: kieran.little@northumberland.gov.uk Website: www.northumberland.gov.uk
-- <http://family.northumberland.gov.uk>
*Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms.
This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation.
*Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins
participants (6)
-
Anatoliy Shudrya -
Andrew Hodgson -
Can Kırca -
Kieran Little -
Scott Granados -
Steve Matzura