Hi, so when I bought an American device, wouldn't it be possible to install a firmware Update with a German voice? Yours sincerely Arno Am Sonntag, 8. September 2013 11:35 schrieb Marc Van der Aa <marc.vanderaa@telenet.be>:
The English firmware upgrade is downloadable from next links:
Pocket - US version= http://www.plextalk.com/dl/ptp1/PTP1UP60000USENG.exe
Pocket - EU version = http://www.plextalk.com/dl/ptp1/PTP1UP60000UKENG.exe
One cannot install European version the US purchased units and the other way around.
Regards,
Marc Van der Aa
-----Original Message----- From: Plextalk [mailto:plextalk-bounces@lists.hodgsonfamily.org] On Behalf Of Bob Acosta Sent: vrijdag 6 september 2013 19:42 To: Plextalk User Discussion List Subject: Re: [Plextalk] pocket firmware update available
Mark, where do i get this update? bob ----- Original Message ----- From: "Marc Van der Aa" <marc.vanderaa@telenet.be> To: "'Plextalk User Discussion List'" <plextalk@lists.hodgsonfamily.org> Sent: Friday, September 06, 2013 12:22 AM Subject: Re: [Plextalk] pocket firmware update available
Hi all,
The Pocket says no content on the SD-card if there is no playable content. A firmware update is not playable. If the PlexVerUp folder with his content is in the root of the SD-card, the firmware update will start (condition is to plug in the AC-adaptor) The upgrade will take about 6 minutes and will power on after updating, settings should be saved (like wi-fi data)
Regards, Marc Van der Aa
-----Original Message----- From: Plextalk [mailto:plextalk-bounces@lists.hodgsonfamily.org] On Behalf Of Arno Schuh Sent: donderdag 5 september 2013 21:48 To: Plextalk User Discussion List Subject: Re: [Plextalk] pocket firmware update available
As I wrote below, I tried both. I copied the complete folder entitled PlexVerUp in the root of the SD card as well as the PlexVerUp.bin and VerUp.dat in the root - but both with the same result: "No content on the SD card".
I of course took a new, FAT32 formated, empty 8 GB card, but it wouldn't work as expected.
Arno
Am Donnerstag, 5. September 2013 20:52 schrieb Rob <rarmstr@mindspring.com>:
I have not updated to the latest version yet, but I have updated the firmware on my Plextalk a couple of times. You need to either extract the files from the ZIP file directly to the root directory of the SD card or extract the files from the ZIP download file to a new folder on your PC and then copy the files from that folder to the root directory of your SD card. Rob
-----Original Message----- From: Plextalk [mailto:plextalk-bounces@lists.hodgsonfamily.org] On Behalf Of Arno Schuh Sent: Thursday, September 05, 2013 2:35 PM To: Plextalk User Discussion List Subject: Re: [Plextalk] pocket firmware update available
Hi,
just I downloaded the ZIP file, put it on an SD card - but got an error message after turn on the device: "No content on the SD card". I tried it with the folder, tried it with both files in the root - but the device wouldn't update.
Any suggestions?
Arno
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk
_______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org http://lists.hodgsonfamily.org/listinfo/plextalk