If you use the USB port to charge the pocket the unit recognizes the change of the funkction. It switch from the read mode to the loading mode. Usually I restart the unit when I load the PTP1 by the USB port before I plug in the cable with the memory drive. And of course the PTP1 only recognizes drives formated with FAT32. Usually thump drives are formated as FAT32, but if you haven't only deleted larger drives, but instead have formated the drive by the Windows format routine, probably it did take ExFAT or NTFS to format the drive. May be the pocket will no longer accept drives with this unknown format. Am Samstag, 1. Oktober 2016 18:50 schrieb Steve Richards via Plextalk <plextalk@lists.hodgsonfamily.org>:
Thank you. I have successfully updated the firmware. Previously I had tried to use the English version but as the device originated in the USA I should have used the US update.
Unfortunately, it has not resolved the original problem of a bad connection between the USB port and the USB Lead. Most of the time I am getting the message ' No USB media'. So is it the lead or port on the Pocket? Steve