Hi Mr Lynch, The Plextalk PTP1 can either be charged by the charger or by USB. If there is a charger problem, one can still use to charge the battery by USB. Therefore power off the unit an connect it to a USB power or PC (use the standard mini-USB cable), to charge the battery to 100% may take about 4,5H Regards, Marc Van der Aa - marc.vanderaa@telenet.be Tel. +32 478 616263 -----Oorspronkelijk bericht----- Van: Plextalk [mailto:plextalk-bounces@lists.hodgsonfamily.org] Namens Flor Lynch Verzonden: maandag 17 oktober 2016 1:56 Aan: Plextalk User Discussion List <plextalk@lists.hodgsonfamily.org> Onderwerp: Re: [Plextalk] AC Adapter: No battery installed, or when off AC, 'battery level 0%' . Perhaps Shinano Kenshi (the makers of Plextalk) should follow the lead of many others, and have just the one USB socket for charging/connecting, providing a USB-to-AC adapter for charging on AC. _______________________________________________ Plextalk mailing list Plextalk@lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/plextalk