- Blind-sysadmins - lists.hodgsonfamily.org

Re: [Blind-sysadmins] booting from the CD on a Dell PE
by Frank Ventura 25 Feb '10

25 Feb '10

Andrew, thanks, yeah I think a DVD is the way to go. Can these older beasts (1900, 2900) even boot from a USB DVD? I might try that. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, February 25, 2010 3:06 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE Hi, Yes, if you use the CDs now there are two Dell CDs you need to use: - The build and update utility disk which is the bootable CD. - The Dell Consoles and Agent disk which has the Dell OpenManage agent on it. You can skip using this disk if you choose not to install the OpenManage setup files during the install phase. Installing using the Dell stuff now really needs a DVD (even a USB DVD is better than using the CDs). 5.3 was the last version to have a CD release, 5.5 is the most recent release of the tool for the older servers (Poweredge 2650, 1750 etc), and there is now 6.1 for the newer gen servers. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 25 February 2010 03:33 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE Scott, thanks After running through the OS install CD utility the Dell installer asks for the following CD: dell open server 5.3 I can't seem to find that anywhere on the support and driver page. I have always been used to merely putting in the build CD and then having it ask for the Windows CD and the rest is history but this is a new one on me. Thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Scott Granados Sent: Wednesday, February 24, 2010 8:31 PM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE F12 is the same I think it's the second option but not 100% certain. Can check tomorrow at work though. ----- Original Message ----- From: "Ryan Shugart" <rshugart(a)pcisys.net> To: "Blind sysadmins list" <blind-sysadmins(a)lists.hodgsonfamily.org> Sent: Wednesday, February 24, 2010 4:22 PM Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE Frank: I don't know about that specific model, but with all the Dell precisions I've worked with, F12 pressed right when the computer boots brings up the 1 time boot menu. The CD is the second or third option. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: Wednesday, February 24, 2010 12:31 PM To: Blind sysadmins list Subject: [Blind-sysadmins] booting from the CD on a Dell PE Hi can anyone refresh my memory as how to I bring up the boot menu on a Dell PE 2900 to boot from the internal CD? Tia Frank _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 1

Re: [Blind-sysadmins] booting from the CD on a Dell PE
by Frank Ventura 25 Feb '10

25 Feb '10

Scott, thanks After running through the OS install CD utility the Dell installer asks for the following CD: dell open server 5.3 I can't seem to find that anywhere on the support and driver page. I have always been used to merely putting in the build CD and then having it ask for the Windows CD and the rest is history but this is a new one on me. Thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Scott Granados Sent: Wednesday, February 24, 2010 8:31 PM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE F12 is the same I think it's the second option but not 100% certain. Can check tomorrow at work though. ----- Original Message ----- From: "Ryan Shugart" <rshugart(a)pcisys.net> To: "Blind sysadmins list" <blind-sysadmins(a)lists.hodgsonfamily.org> Sent: Wednesday, February 24, 2010 4:22 PM Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE Frank: I don't know about that specific model, but with all the Dell precisions I've worked with, F12 pressed right when the computer boots brings up the 1 time boot menu. The CD is the second or third option. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: Wednesday, February 24, 2010 12:31 PM To: Blind sysadmins list Subject: [Blind-sysadmins] booting from the CD on a Dell PE Hi can anyone refresh my memory as how to I bring up the boot menu on a Dell PE 2900 to boot from the internal CD? Tia Frank _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 1

Help needed, was: RE: booting from the CD on a Dell PE
by Frank Ventura 25 Feb '10

25 Feb '10

Ryan, thanks I got it booted by changing the boot order to boot from the CD first. I booted into the Dell 2900 System build utility and had a sighted friend run through the setup screens to do an OS install. After putting in the Windows product key the build utility says prepareing to install with a progress indicator that gets up to 51 percent and then asks for the following CD: dell open server 5.3 I looked at the driver section for Power Edge 2900 on the http://support.dell.com site and could not find that CD image. Can anyone point me to the exact location and name of the CD image I need to finish the installation? Much appreciated Frank Ventura -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Ryan Shugart Sent: Wednesday, February 24, 2010 7:23 PM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] booting from the CD on a Dell PE Frank: I don't know about that specific model, but with all the Dell precisions I've worked with, F12 pressed right when the computer boots brings up the 1 time boot menu. The CD is the second or third option. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: Wednesday, February 24, 2010 12:31 PM To: Blind sysadmins list Subject: [Blind-sysadmins] booting from the CD on a Dell PE Hi can anyone refresh my memory as how to I bring up the boot menu on a Dell PE 2900 to boot from the internal CD? Tia Frank _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 2

booting from the CD on a Dell PE
by Frank Ventura 25 Feb '10

25 Feb '10

Hi can anyone refresh my memory as how to I bring up the boot menu on a Dell PE 2900 to boot from the internal CD? Tia Frank

3 3

any juniper srx users out there?
by Scott Granados 24 Feb '10

24 Feb '10

Hi, so I have a configuration from a Juniper srx210 I'm having issue with. I have the source nat defined, interfaces defined, zone rules defined and can't get traffic to work outbound. My source nat rule-set shows matches (many) so I think that part is working. Anyone familiar with these devices and could review my config and see what I'm missing. I'm pretty new to Junos, especially on firewalls, so could definitely use some pointers. Thanks Scott

1 0

Ubuntu unattended install
by David Mehler 30 Jan '10

30 Jan '10

Hi, I was wondering if anyone had done an unattended install of ubuntu 9.0 server? I was wanting to remaster a server CD so that drop it in a box it loads up and does a customized unattended install. Thanks. Dave.

1 0

Re: [Blind-sysadmins] Using Outlook 2007/Exchange2007 withshared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Ah, OK thanks. That makes more sense. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 9:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange2007 withshared calendars and JFW Hi, Oops I meant J-Tools. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 14:24 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Andrew, thanks did you mean the J-Tools or J-Say. If I am reading that site correctly the J-Say is for Draggon speach recognition only. But, the J-Tools has a few references to Outlook calendars. thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 8:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Hi, As far as I know the only reliable way of doing this is to use the J-Say scripts from Brian Hartgen http://www.tandt-consultancy.com Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 13:24 To: Blind sysadmins list Subject: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 with shared calendars and JFW Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0

Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Andrew, thanks did you mean the J-Tools or J-Say. If I am reading that site correctly the J-Say is for Draggon speach recognition only. But, the J-Tools has a few references to Outlook calendars. thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 8:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Hi, As far as I know the only reliable way of doing this is to use the J-Say scripts from Brian Hartgen http://www.tandt-consultancy.com Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 13:24 To: Blind sysadmins list Subject: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 with shared calendars and JFW Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 1

Using Outlook 2007/Exchange 2007 with shared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura

2 1

Exchange Server 2003 and Windows 7 Ultimate 64 bit.
by George Bell 25 Jan '10

25 Jan '10

I'm banging my head against concrete here, and wondered if any of you have experience of Outlook 2007 and Windows 7 Ultimate 64 bit, accessing an Exchange 2003 Server at my office from my home desktop. I have access via the same Virgin Netgear Router here at home via my laptop which has Windows Professional 32 bit and Outlook 2003. As far as I can see, the Dray Tek Smart VPN Client is set up identically tio the laptop. I know for sure that the VPN is connected, as I can access any of the server's drives, and even Remore Desktop to the server. But whatever I try, I keep being told that the Exchange Server is not available. However, what has got be a tad suspicious, is that I have a similar problem accessing an America supplier's server using the same Username and Password as I do onloy my laptop, which suggests that I may be missing something 64 bit specific. Has anyone any thoughts? George.

3 13