- Blind-sysadmins - lists.hodgsonfamily.org

Wire shark accessibility
by Barry Toner 16 Jan '18

16 Jan '18

Hi all, Just wondering if any of you folks are using this and if you can comment on it's accessibility? Thanks, Barry.

8 23

Re: [Blind-sysadmins] Solarwinds Accessibility
by vic.pereira＠ssc-spc.gc.ca 15 Jan '18

15 Jan '18

Roughly five or six years ago I used the Solarwinds web interface. It worked very nicely with Window-eyes. Since I am no longer watching for alerts and managing servers over a wide area network, I am not able to speak to how recent versions work with JFW. If the web interfaces are the same I don't see it being a problem, because they were using standard HTML controls. Vic Pereira Project Manager, Networks and End Users Branch Shared Services Canada, Government of Canada vic.pereira(a)ssc-spc.gc.ca / Tel: 204-781-5046 Gestionnaire de Projet, Direction Générale des Réseaux et des Utilisateurs Finaux Services partagés Canada, Gouvernement du Canada vic.pereira(a)ssc-spc.gc.ca / Tél. : 204-781-5046 -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Barry Toner Sent: Monday, January 15, 2018 06:12 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Wire shark accessibility Hi, How is solarwinds for accessibility? I've an interview coming up for a Cyber Security company and want to gather as much info prior to this. Thanks, Barry. -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Kieran Little via Blind-sysadmins Sent: Monday, January 15, 2018 12:09 PM To: Blind sysadmins list Cc: Kieran Little Subject: Re: [Blind-sysadmins] Wire shark accessibility I wouldn't know anything about that; I've ever only used it to examine packets. For network monitoring we use solarwinds On 15 January 2018 at 12:05, Barry Toner <barry(a)tonermail.co.uk> wrote: > Cheers. > How about having it email logs/alerts for analysis? > > Cheers, > Barry. > > -----Original Message----- > From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily. > org] On Behalf Of Kieran Little via Blind-sysadmins > Sent: Monday, January 15, 2018 10:41 AM > To: Blind sysadmins list > Cc: Kieran Little > Subject: Re: [Blind-sysadmins] Wire shark accessibility > > I haven't for a while. From what I remember though you could get > something out of it with jaws curser. Due to its nature it's quite > hard to get stuff out of it though as there is constantly new info coming in. > Regards, > Kieran. > > On 15 January 2018 at 10:38, Barry Toner <barry(a)tonermail.co.uk> wrote: > > > Hi all, > > > > Just wondering if any of you folks are using this and if you can > > comment on its accessibility? > > > > Thanks, > > Barry. > > _______________________________________________ > > Blind-sysadmins mailing list > > Blind-sysadmins(a)lists.hodgsonfamily.org > > https://lists.hodgsonfamily.org/listinfo/blind-sysadmins > > > > > > -- > Kieran Little > IT Apprentice > Information Services > Northumberland County Council > County Hall > Morpeth > NE61 2EF > Service desk: 01670 627004 > Direct: 01670623699 > Email: kieran.little(a)northumberland.gov.uk > Website: www.northumberland.gov.uk > > -- > <http://family.northumberland.gov.uk> > > *Save Time Do It Online!* > We have made a few key improvements to our site to make our services > easy to access. Now you can do everything from paying your council > tax, to reporting a faulty street light online. Go to: > www.northumberland.gov.uk and click 'pay, apply or report' to access > the relevant forms. > > This email is intended solely for the individual or individuals to > whom it is addressed, and may contain confidential and/or privileged > material. If you are not the intended recipient you are notified that > disclosing, copying, distributing or taking any action in reliance on > the contents of this email is prohibited. If you receive this email in > error, please contact the sender and delete the email from any > computer. All email communication may be subject to recording and/or > monitoring in accordance with internal policy and relevant legislation. > > *Please, consider your environmental responsibility. Before printing > this e-mail ask yourself: "Do I need a hard copy?"* > _______________________________________________ > Blind-sysadmins mailing list > Blind-sysadmins(a)lists.hodgsonfamily.org > https://lists.hodgsonfamily.org/listinfo/blind-sysadmins > > _______________________________________________ > Blind-sysadmins mailing list > Blind-sysadmins(a)lists.hodgsonfamily.org > https://lists.hodgsonfamily.org/listinfo/blind-sysadmins > -- Kieran Little IT Apprentice Information Services Northumberland County Council County Hall Morpeth NE61 2EF Service desk: 01670 627004 Direct: 01670623699 Email: kieran.little(a)northumberland.gov.uk Website: www.northumberland.gov.uk -- <http://family.northumberland.gov.uk> *Save Time Do It Online!* We have made a few key improvements to our site to make our services easy to access. Now you can do everything from paying your council tax, to reporting a faulty street light online. Go to: www.northumberland.gov.uk and click 'pay, apply or report' to access the relevant forms. This email is intended solely for the individual or individuals to whom it is addressed, and may contain confidential and/or privileged material. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this email is prohibited. If you receive this email in error, please contact the sender and delete the email from any computer. All email communication may be subject to recording and/or monitoring in accordance with internal policy and relevant legislation. *Please, consider your environmental responsibility. Before printing this e-mail ask yourself: "Do I need a hard copy?"* _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins

1 0

Wire shark accessibility
by Barry Toner 15 Jan '18

15 Jan '18

Hi all, Just wondering if any of you folks are using this and if you can comment on it's accessibility? Thanks, Barry.

1 0

Re: [Blind-sysadmins] missmatching mbr and gpt
by Eigeldinger Simon 12 Jan '18

12 Jan '18

Hi, The MBR was broken afterwards as well but has been fixed. Now everything works as expected. Greetings and thanks, Simon Mit freundlichen Grüßen Simon Eigeldinger Informatik Nebengebäude 1, OG1 Stadt Hohenems Kaiser-Franz-Josef-Straße 4 6845 Hohenems T: +43 5576 7101-1143 | E: simon.eigeldinger(a)hohenems.at | www.hohenems.at Diese Nachricht und allfällige angehängte Dokumente sind vertraulich und nur für den/die Adressaten bestimmt. -----Ursprüngliche Nachricht----- Von: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] Im Auftrag von Andrew Hodgson Gesendet: Donnerstag, 11. Jänner 2018 19:40 An: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Betreff: Re: [Blind-sysadmins] missmatching mbr and gpt Hi, Exactly. It is actually though valid to have a GPT partition in Windows 7 as it supports EFI, but it isn't a common configuration. If I were you I would verify the laptop is booting via mbr and then delete the GPT from the disk. Andrew. -----Original Message----- From: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Eigeldinger Simon Sent: 11 January 2018 14:08 To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] missmatching mbr and gpt Hi Andrew, This laptop came with win 10 as far as I know and was downgraded to win 7. Seems the disk wasn't properly whiped. Thanks, Greetings, Simon Mit freundlichen Grüßen Simon Eigeldinger Informatik Nebengebäude 1, OG1 Stadt Hohenems Kaiser-Franz-Josef-Straße 4 6845 Hohenems T: +43 5576 7101-1143 | E: simon.eigeldinger(a)hohenems.at | www.hohenems.at Diese Nachricht und allfällige angehängte Dokumente sind vertraulich und nur für den/die Adressaten bestimmt. -----Ursprüngliche Nachricht----- Von: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] Im Auftrag von Andrew Hodgson Gesendet: Donnerstag, 11. Jänner 2018 13:11 An: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Betreff: Re: [Blind-sysadmins] missmatching mbr and gpt Hi, I saw this when installing Windows 7 on a machine that had Windows 8 on it and in that case I knew the machine was MBR so could fix this. The thing is you really need to know why the GPT partition table may be there in the first place to understand the implication of removing either of the partition tables. Every time I do a new installation like this now I do diskpart clean on the boot volume. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] on behalf of Eigeldinger Simon [simon.eigeldinger(a)hohenems.at] Sent: 11 January 2018 06:52 To: Blind sysadmins list Subject: [Blind-sysadmins] missmatching mbr and gpt Hi all, I wanted to backup a win 7 64 bit laptop which has been recently been reinstalled. Now clonezilla gives me that error: The selected devices: sda This disk contains mismatched GPT and MBR partition: /dev/sda It will confuse Clonezilla and might make the saved image useless or fail to clo ne the disk. You can use gdisk or sgdisk to fix this issue. E.g. if you are sure only MBR par tition table is the one you want, you can run this command to destroy the GPT pa rtition table while keep the MBR partition table: sudo sgdisk -z /dev/sdx //NOTE// (1) Replace /dev/sdx with the above hard drive name. (2) ALL EXISTING D ATA ON THE DISK WILL BE LOST IF GIVING WRONG COMMAND. USE THIS COMMAND CAREFULLY ! Please fix this issue then restart Clonezilla again. Program terminated!! Press "Enter" to continue...... Is that dangerous when i remove the gpt partition? Has someone done that without any issues? Greetings and thanks, Simon _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins

1 0

Re: [Blind-sysadmins] missmatching mbr and gpt
by Eigeldinger Simon 11 Jan '18

11 Jan '18

Hi Andrew, This laptop came with win 10 as far as I know and was downgraded to win 7. Seems the disk wasn't properly whiped. Thanks, Greetings, Simon Mit freundlichen Grüßen Simon Eigeldinger Informatik Nebengebäude 1, OG1 Stadt Hohenems Kaiser-Franz-Josef-Straße 4 6845 Hohenems T: +43 5576 7101-1143 | E: simon.eigeldinger(a)hohenems.at | www.hohenems.at Diese Nachricht und allfällige angehängte Dokumente sind vertraulich und nur für den/die Adressaten bestimmt. -----Ursprüngliche Nachricht----- Von: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] Im Auftrag von Andrew Hodgson Gesendet: Donnerstag, 11. Jänner 2018 13:11 An: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Betreff: Re: [Blind-sysadmins] missmatching mbr and gpt Hi, I saw this when installing Windows 7 on a machine that had Windows 8 on it and in that case I knew the machine was MBR so could fix this. The thing is you really need to know why the GPT partition table may be there in the first place to understand the implication of removing either of the partition tables. Every time I do a new installation like this now I do diskpart clean on the boot volume. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] on behalf of Eigeldinger Simon [simon.eigeldinger(a)hohenems.at] Sent: 11 January 2018 06:52 To: Blind sysadmins list Subject: [Blind-sysadmins] missmatching mbr and gpt Hi all, I wanted to backup a win 7 64 bit laptop which has been recently been reinstalled. Now clonezilla gives me that error: The selected devices: sda This disk contains mismatched GPT and MBR partition: /dev/sda It will confuse Clonezilla and might make the saved image useless or fail to clo ne the disk. You can use gdisk or sgdisk to fix this issue. E.g. if you are sure only MBR par tition table is the one you want, you can run this command to destroy the GPT pa rtition table while keep the MBR partition table: sudo sgdisk -z /dev/sdx //NOTE// (1) Replace /dev/sdx with the above hard drive name. (2) ALL EXISTING D ATA ON THE DISK WILL BE LOST IF GIVING WRONG COMMAND. USE THIS COMMAND CAREFULLY ! Please fix this issue then restart Clonezilla again. Program terminated!! Press "Enter" to continue...... Is that dangerous when i remove the gpt partition? Has someone done that without any issues? Greetings and thanks, Simon _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins

2 2

Re: [Blind-sysadmins] missmatching mbr and gpt
by Eigeldinger Simon 11 Jan '18

11 Jan '18

Hi Andrew, This laptop came with win 10 as far as I know and was downgraded to win 7. Seems the disk wasn't properly whiped. Thanks, Greetings, Simon -----Ursprüngliche Nachricht----- Von: Blind-sysadmins [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] Im Auftrag von Andrew Hodgson Gesendet: Donnerstag, 11. Jänner 2018 13:11 An: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Betreff: Re: [Blind-sysadmins] missmatching mbr and gpt Hi, I saw this when installing Windows 7 on a machine that had Windows 8 on it and in that case I knew the machine was MBR so could fix this. The thing is you really need to know why the GPT partition table may be there in the first place to understand the implication of removing either of the partition tables. Every time I do a new installation like this now I do diskpart clean on the boot volume. Andrew. ________________________________________ From: Blind-sysadmins [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] on behalf of Eigeldinger Simon [simon.eigeldinger(a)hohenems.at] Sent: 11 January 2018 06:52 To: Blind sysadmins list Subject: [Blind-sysadmins] missmatching mbr and gpt Hi all, I wanted to backup a win 7 64 bit laptop which has been recently been reinstalled. Now clonezilla gives me that error: The selected devices: sda This disk contains mismatched GPT and MBR partition: /dev/sda It will confuse Clonezilla and might make the saved image useless or fail to clo ne the disk. You can use gdisk or sgdisk to fix this issue. E.g. if you are sure only MBR par tition table is the one you want, you can run this command to destroy the GPT pa rtition table while keep the MBR partition table: sudo sgdisk -z /dev/sdx //NOTE// (1) Replace /dev/sdx with the above hard drive name. (2) ALL EXISTING D ATA ON THE DISK WILL BE LOST IF GIVING WRONG COMMAND. USE THIS COMMAND CAREFULLY ! Please fix this issue then restart Clonezilla again. Program terminated!! Press "Enter" to continue...... Is that dangerous when i remove the gpt partition? Has someone done that without any issues? Greetings and thanks, Simon _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/blind-sysadmins

1 0

missmatching mbr and gpt
by Eigeldinger Simon 11 Jan '18

11 Jan '18

Hi all, I wanted to backup a win 7 64 bit laptop which has been recently been reinstalled. Now clonezilla gives me that error: The selected devices: sda This disk contains mismatched GPT and MBR partition: /dev/sda It will confuse Clonezilla and might make the saved image useless or fail to clo ne the disk. You can use gdisk or sgdisk to fix this issue. E.g. if you are sure only MBR par tition table is the one you want, you can run this command to destroy the GPT pa rtition table while keep the MBR partition table: sudo sgdisk -z /dev/sdx //NOTE// (1) Replace /dev/sdx with the above hard drive name. (2) ALL EXISTING D ATA ON THE DISK WILL BE LOST IF GIVING WRONG COMMAND. USE THIS COMMAND CAREFULLY ! Please fix this issue then restart Clonezilla again. Program terminated!! Press "Enter" to continue...... Is that dangerous when i remove the gpt partition? Has someone done that without any issues? Greetings and thanks, Simon

2 2

Visual studio Code accessibility. Working with Arduino.
by Darragh Ó Héiligh 02 Jan '18

02 Jan '18

I really like the UI of visual Studio Code. It makes perfect sense and I really like that when using it with NVDA, the verbosity is just perfect! But I'm having a problem when trying to upload sketches to the Arduino. I'm not sure what that problem is as I'm not getting any details. There's nothing in the output window. Here are my questions. Can anyone assist please? 1. When uploading to the Arduino. Do I need to explicitly initialize the board? This wasn't necessary in previous IDE's. 2. Should the output window report on the success or the failure of uploading the sketch? 3. Is the bod rate and serial connection saved when the Visual studio code editor is restarted? I don't think it is. 4. When I show the serial port but I close the output window, how is it re-enabled again? There's no window menu. I generally just try the output window again. Any other tips appreciated.

2 6

cloning a vm virtual drive
by David Mehler 26 Dec '17

26 Dec '17

Hello, I'm using VMware workstation and have a vm with a separate virtual drive. It is now full. What I'm wanting to do is add a new virtual hard drive, a larger one, this I can do. I'm then needing to clone the smaller drive to the larger one growing the partition size. So say a 40gb drive to a 60gb drive, the partition would be sixty gb in size. For reference this is on a Ubuntu 17.04 vm. I'd like to use Linux tools. Any help appreciated. Thanks. Dave.

3 4

cloning a vm virtual drive
by David Mehler 26 Dec '17

26 Dec '17

Hello, I'm using VMware workstation and have a vm with a separate virtual drive. It is now full. What I'm wanting to do is add a new virtual hard drive, a larger one, this I can do. I'm then needing to clone the smaller drive to the larger one growing the partition size. So say a 40gb drive to a 60gb drive, the partition would be sixty gb in size. For reference this is on a Ubuntu 17.04 vm. I'd like to use Linux tools. Any help appreciated. Thanks. Dave.

1 0