- Blind-sysadmins - lists.hodgsonfamily.org

Re: [Blind-sysadmins] networking issue
by Andrew Hodgson 12 Aug '09

12 Aug '09

Hi Dave, Yes move the second network onto the 192.168.2.x subnet, then that will give room for ICS to use 192.168.0.x. As far as I remember, that IP range in ICS is no negociable. Ad-hoc wifi means setting up wifi using two wifi cards, unlike the system that uses access points. I only did it once and it took ages, I had to use the wifi client by the nic manufacturer and not the builtin one in Windows. Andrew. -----Original Message----- From: Dave [mailto:dave.mehler@gmail.com] Sent: 12 August 2009 16:38 To: Andrew Hodgson Subject: RE: [Blind-sysadmins] networking issue Hi, Ok, my dsl modem is on 192.168.1.x actually .254, if i move the 192.168.0.x clients to 192.168.2.x and set up ICS on the xp box in question it'll set to 192.168.0.x will that work? Second thing, where is internet connection sharing? My brain mushed out and i can't remember where it is. Ad-hoc WiFi issues, is that like the wireless network not being immediately available on system boot, takes a minute, i know about that one, i tried to set up a map network drive script it kept failing since the network wasn't up at the time. Thanks. Dave. -----Original Message----- From: Andrew Hodgson [mailto:andrew@hodgsonfamily.org] Sent: Wednesday, August 12, 2009 5:34 AM To: dave.mehler(a)gmail.com; Blind sysadmins list Subject: RE: [Blind-sysadmins] networking issue Hi, Windows will by default only allow one default gateway. It will be possible to use Internet Connection sharing, though you will have to reset the IP address on the router to anything apart from 192.168.0.x, because that is what the ICS software will assign by default. You will also have to deal with ad-hoc wifi issues. Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Dave Sent: 11 August 2009 04:50 To: Dave Subject: [Blind-sysadmins] networking issue Hello everyone, I haven't googled this one yet, that's next after i hit send, i'm wondering if any of you have seen this one. I've got DSL with a dsl modem and a wireless router. I've got one machine that's far enough away so that running a wire isn't practical, hence the reason the wireless router, and a second machine even further away. Both of these machines are within wireless range. The machine that's closer to the wireless router has two nics in it, the wireless one which connects up to the network and a regular rj45 internal. I had the thought that i could assign the wired nic a static ip then use network connection sharing to allow the computer further away to share the machine's internet connection. The two computers are connected by a switch. My problem is that whenever the wired card is up, meaning it has an ip, the wireless card won't see the gateway, which is 192.168.0.1, take out the cable and refresh the dhcp lease on the wireless card and the gateway once again returns. The wireless card has an address on the 192.168.0.x range and i'm statically assigning the wired nic an address on that subnet though outside the dhcp server's lease. Both machines are running xp pro. This might or might not be related to this issue, more than likely it's a symptom of the same issue. I want to map network drives on startup, so i loaded in a drive mapping script in the system's user configuration section of the local profile. A wired nic it would have worked, since it's going wireless i am getting the error "No network provider was able to validate the path". Any suggestions. Thanks. Dave. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0

Re: [Blind-sysadmins] networking issue
by Andrew Hodgson 12 Aug '09

12 Aug '09

Hi Dave, Yes move the second network onto the 192.168.2.x subnet, then that will give room for ICS to use 192.168.0.x. As far as I remember, that IP range in ICS is no negociable. Ad-hoc wifi means setting up wifi using two wifi cards, unlike the system that uses access points. I only did it once and it took ages, I had to use the wifi client by the nic manufacturer and not the builtin one in Windows. Andrew. -----Original Message----- From: Dave [mailto:dave.mehler@gmail.com] Sent: 12 August 2009 16:38 To: Andrew Hodgson Subject: RE: [Blind-sysadmins] networking issue Hi, Ok, my dsl modem is on 192.168.1.x actually .254, if i move the 192.168.0.x clients to 192.168.2.x and set up ICS on the xp box in question it'll set to 192.168.0.x will that work? Second thing, where is internet connection sharing? My brain mushed out and i can't remember where it is. Ad-hoc WiFi issues, is that like the wireless network not being immediately available on system boot, takes a minute, i know about that one, i tried to set up a map network drive script it kept failing since the network wasn't up at the time. Thanks. Dave. -----Original Message----- From: Andrew Hodgson [mailto:andrew@hodgsonfamily.org] Sent: Wednesday, August 12, 2009 5:34 AM To: dave.mehler(a)gmail.com; Blind sysadmins list Subject: RE: [Blind-sysadmins] networking issue Hi, Windows will by default only allow one default gateway. It will be possible to use Internet Connection sharing, though you will have to reset the IP address on the router to anything apart from 192.168.0.x, because that is what the ICS software will assign by default. You will also have to deal with ad-hoc wifi issues. Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Dave Sent: 11 August 2009 04:50 To: Dave Subject: [Blind-sysadmins] networking issue Hello everyone, I haven't googled this one yet, that's next after i hit send, i'm wondering if any of you have seen this one. I've got DSL with a dsl modem and a wireless router. I've got one machine that's far enough away so that running a wire isn't practical, hence the reason the wireless router, and a second machine even further away. Both of these machines are within wireless range. The machine that's closer to the wireless router has two nics in it, the wireless one which connects up to the network and a regular rj45 internal. I had the thought that i could assign the wired nic a static ip then use network connection sharing to allow the computer further away to share the machine's internet connection. The two computers are connected by a switch. My problem is that whenever the wired card is up, meaning it has an ip, the wireless card won't see the gateway, which is 192.168.0.1, take out the cable and refresh the dhcp lease on the wireless card and the gateway once again returns. The wireless card has an address on the 192.168.0.x range and i'm statically assigning the wired nic an address on that subnet though outside the dhcp server's lease. Both machines are running xp pro. This might or might not be related to this issue, more than likely it's a symptom of the same issue. I want to map network drives on startup, so i loaded in a drive mapping script in the system's user configuration section of the local profile. A wired nic it would have worked, since it's going wireless i am getting the error "No network provider was able to validate the path". Any suggestions. Thanks. Dave. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0

networking issue
by Dave 12 Aug '09

12 Aug '09

Hello everyone, I haven't googled this one yet, that's next after i hit send, i'm wondering if any of you have seen this one. I've got DSL with a dsl modem and a wireless router. I've got one machine that's far enough away so that running a wire isn't practical, hence the reason the wireless router, and a second machine even further away. Both of these machines are within wireless range. The machine that's closer to the wireless router has two nics in it, the wireless one which connects up to the network and a regular rj45 internal. I had the thought that i could assign the wired nic a static ip then use network connection sharing to allow the computer further away to share the machine's internet connection. The two computers are connected by a switch. My problem is that whenever the wired card is up, meaning it has an ip, the wireless card won't see the gateway, which is 192.168.0.1, take out the cable and refresh the dhcp lease on the wireless card and the gateway once again returns. The wireless card has an address on the 192.168.0.x range and i'm statically assigning the wired nic an address on that subnet though outside the dhcp server's lease. Both machines are running xp pro. This might or might not be related to this issue, more than likely it's a symptom of the same issue. I want to map network drives on startup, so i loaded in a drive mapping script in the system's user configuration section of the local profile. A wired nic it would have worked, since it's going wireless i am getting the error "No network provider was able to validate the path". Any suggestions. Thanks. Dave.

3 3

anyone running a postfix mail server or a web server outside the U.S.?
by Dave 11 Aug '09

11 Aug '09

Hello, I've got two questions on different servers. The simple one first, does anyone have a web server outside the U.S. I could host on? I'm going through a legal issue, one that will impact all blind individuals negatively if i am not successful, and I need to raise awareness of it. To do this i have chosen to do internet hosting. I'm aware that the U.S. government can under certain circumstances via a court order force a hosting provider to remove a site, I'm expecting this, therefor i want to host on a server outside the U.S. This will not be for anything illegal, I want to ensure the voice on my issue can not be silenced. I will do all the work, I just need server space. Second question, is anyone running a postfix email server? If so, what antispam measures are you utilizing? I'm trying to get postfix, amavisd-new, spamassassin, clamav, and postgrey to play together on a Centos machine. For the most part i have it, although i keep getting mails addressed to mailman.$mydomain which i am not sure of. I want to tighten up my spamassassin configuration and have questions on the rules files, updating them and increasing or decreasing scores. Thanks. Dave.

1 0

does anyone else hate the trend to web GUIs in network equipment?
by Scott Granados 06 Aug '09

06 Aug '09

I'm a little disturbed by a trend in network hardware where everything has to have a web front end to configure. Even gear like the Cisco ASA has this totally inaccessible java based ASDM thingy that sucks on a whole new level. (even to sited users) What's happening to the command line? It's so much better and more efficient for working with network elements and frankly for servers. Everyone tell your Cisco reps that this is a bad thing. (tm)

8 26

Backup emails in real time
by Octavian Râşniţă 05 Aug '09

05 Aug '09

Hi, I was asked to save all the email messages sent from my employer's SMTP server and all the messages received on its POP3 server automaticly. Do you know if this is possible? We use Postfix. Are there any hooks we can attach handlers to them in the POP3/SMTP servers or are there any configuration settings we can choose for sending the sent/received messages to an email address, or to a file on the hard disk? Thanks. Octavian

2 1

mailman and postfix virtual mailbox domains
by Dave 05 Aug '09

05 Aug '09

Hello, Is anyone using mailman on Linux with postfix and virtual mailbox domains, i.e. no system users? If so, i'd like to hear from you. I'm trying to get this going on a centos box and having difficulty. This one might be better private, i'm not sure it's not to specific. Thanks. Dave.

2 1

backing up a partition via the internet
by Dave 04 Aug '09

04 Aug '09

Hello, I've got a remote server, Linux, that i have to redo. My hosting provider makes the redo easy, as they have images you can select, operating system version and dependingo on what you pick is what you get. My problem is it'll kill my current data. I've got to back up the / partition from this server to a local server here, then redo the remote machine, then reload the data. Has anyone done partition backups over the net? Thanks. Dave.

7 16

any ghost users?
by Dave 29 Jul '09

29 Jul '09

Hello, Do we have any Norton Ghost users specifically ghost 11 on list? If so, can you write me privately? I'm having an issue ghosting one drive to another, 20 gb master to a 320 gb slave drive, ghost is freezing through the process, though not always in the same place. Thanks. Dave.

1 0

linux directory backup with symlinks
by Dave 23 Jul '09

23 Jul '09

Hello, I've got a directory a du -sh on it shows it's 330 mb in size. This is on a centos 5.3 box. It has directories, regular files and symlinks in it. This shows what happens when i'm working late, brain goes to mush. I want to back it all up symlinks and all making an exact copy for archival purposes. I've tried some tar commands -cpf and -chpf but those gave me different archive sizes, when i uncompressed the folder it was larger or smaller than the original and not by a little bit either there was a 5 mb difference in one case, a 35 mb in another, i'm assuming the symlinks are the snagpoint, and that tar is creating hard links. I thought about rsync but didn't think it archived, pax i don't know. Suggestions welcome. Thanks. Dave.

2 1