- Blind-sysadmins - lists.hodgsonfamily.org

two unrelated issues that are driving me crazy!
by David Mehler 09 Oct '09

09 Oct '09

Hello, I'm glad it's Friday, because i'm contemplating getting a drink if i make it through this day. I've got two unrelated issues that are driving me up the wall. One is i need to get it fixed, because i need it to work, the other is this worked before and it's making me pull my hair out now that it isn't! Ok, enough ranting. Here goes. First of all i hate fresh reinstalls even though i know they are necessary, even with backup images it seems as if i take a week or so afterward ironing out bugs. My first one comes in the form of vmware server. In a slight aside i found Vista performance unacceptable on this machine so it went back to xp pro, i need to find 2 more gigs of ddr5700 ram for this machine. Ok, vmware server, install it and reload the virtual machines from backup. They go in to c:\Virtual machines the default place where server looks for them. I log out of the admin account and log on as my user who is in the power user's group and i try to open a virtual machine so i can then start it. Slight problem i get a permissions denied message, with no intdication if it's a device, filesystem, user right, i had this working prveiously, and i can not remember what i did i thought i would have noted it down, apparently i missed that one. My second problem and this is occurring for administrator and my user i can not for the life of me get my view settings to stick. This is going past iritating and getting in to downright annoying given the fact that i go in to some folders and they're in icon view, others are in list views. Here's what i did i can't figure where i missed a step. I went in to my computer though not in to any drive, went to view, toolbars and unchecked address bar. I then went back to view twice more, the first to go through the explorer bars options and ensure they were all off they were, i like running with a clean screen, and the second was to take that folder from icon view where it was, to list view. I then went to tools, folder options, ensured folders were set to classic and ton the view tab turned off the hide extensions for known filetypes option. I then hit apply and ok, settings looked good so i went back in to tools, folder options view tab and applied those settings to all folders, ok-d all the way out and closed the my computer window. I then went back in, first folder the my computer window worked fine, went to the c: drive, it was back to icon view, i do not understand why these settings are not taking. If i could figure out where in group policy these settings are or create a template i'd force them by doing it that way, but that seems like using a steam roller to kill a problem. I am open to suggestions. Thanks. Dave.

1 0

ANSWER: "Windows 7 + PCI Simple Communications Controller +Compaq 6910P"
by George Bell 02 Oct '09

02 Oct '09

My problem has been solved! And if there's any danger that you might end up installing Windows 7 on a Compaq laptop (maybe even other makes, for all I know) then I suggest you file this message in a very safe place. I make no apologies for forwarding the entire reply I received from the Intel Business Communities Forum. The answer staggered me, as I had already attempted to install this, but not in the way described here. No sir - I RTFM'd first! My mistake there! George. -----Original Message----- From: David Hollway [mailto:webadmin@intel.com] Sent: 02 October 2009 14:52 To: George Bell Subject: [Business PC Section] New message: "Windows 7 + PCI Simple Communications Controller +Compaq 6910P" George Bell, A new message was posted in the thread "Windows 7 + PCI Simple Communications Controller +Compaq 6910P": http://communities.intel.com/message/69305#69305 Author : David Hollway Profile : http://communities.intel.com/people/david.hollway Message: -------------------------------------------------------------- +> I apparently require drivers for the PCI Simple Communications Controller.+ Hi George, As this laptop uses the Intel GM965/PM965 chipset, the unknown "PCI Simple Communications Controller" device is likely to be the Management Engine Interface. This is a component of the chipset that controls environmental monitoring (fan speeds, voltages, etc). On machines with Intel vPro technology, it also runs the Active Management Technology firmware to provide out-of-band management capabilities. You can verify whether this is in fact the case by checking the PCI Vendor/Device codes - double-click the entry in the Device Manager, click the "Details" tab, and from the "Property" drop-down select "Hardware Ids". The entries in the "Value" field will give you the vendor and device codes. If you see something like "PCI\VEN_8086&DEV_2A04..." then the vendor code is 8086 (i.e, Intel) and the device code is 2A04 (i.e, the Management Engine interface). That said, a driver should be readily available for this device. I presume that the HP driver you refer to is the one found at this link? http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.j sp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=335 7378&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=ob-58326-1 It links to this particular file: ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38313.exe This is the Vista x86/x64 driver for the MEI device. *Update -* since I started to compose this response, I have managed to obtain a Compaq/HP 6910p notebook and I've just installed Windows 7 Ultimate on it. Yes, it seems that the "PCI Simple Communications Controller" is the MEI, as I thought. I have used the 32-bit x86 build of Windows 7 - if you are using x64 then the outcome might be different. I ran the SP38313.exe file and it does, indeed, give an error "this operating system is not supported". But! ..this is caused by a check in the Setup utility, which doesn't recognise Windows 7. *However,*++ the EXE file, when run, unpacks its contents to C:\SWSETUP\SP38313. Under that folder are the actual driver files that you need - in the \HECI subfolder, in the case of 32-bit Windows (the .sys file is the driver; the .cat and .inf are the descriptor INF and security signature). The following sequence allows installation of the driver: * go to Device Manager, double-click on the "PCI Simple Communications Controller" entry * in the device properties dialog, click on "Update Driver" * select "Browse my computer for driver software" * when prompted, enter the path to which the SP38313.EXE driver files have been unpacked - typically, C:\SWSETUP\SP38313\HECI. * click Next. In my case (I've tested it and written down what I did, step-by-step), this resulted in the message "Windows has successfully updated your driver software", and a new "Intel(R) Management Engine Interface" entry in the System Devices category of the Device Manager. As I said above, I haven't tested with the x64 version of Windows 7, but a similar principle should apply - just use C:\SWSETUP\SP38313\x64 as a path rather than \HECI. Let me know whether this helps. Good luck! -------------------------------------------------------------- To reply to this message visit the message page: http://communities.intel.com/message/69305#69305

1 0

ANSWER: "Windows 7 + PCI Simple Communications Controller +Compaq 6910P"
by George Bell 02 Oct '09

02 Oct '09

My problem has been solved! And if there's any danger that you might end up installing Windows 7 on a Compaq laptop (maybe even other makes, for all I know) then I suggest you file this message in a very safe place. I make no apologies for forwarding the entire reply I received from the Intel Business Communities Forum. The answer staggered me, as I had already attempted to install this, but not in the way described here. No sir - I RTFM'd first! My mistake there! George. -----Original Message----- From: David Hollway [mailto:webadmin@intel.com] Sent: 02 October 2009 14:52 To: George Bell Subject: [Business PC Section] New message: "Windows 7 + PCI Simple Communications Controller +Compaq 6910P" George Bell, A new message was posted in the thread "Windows 7 + PCI Simple Communications Controller +Compaq 6910P": http://communities.intel.com/message/69305#69305 Author : David Hollway Profile : http://communities.intel.com/people/david.hollway Message: -------------------------------------------------------------- +> I apparently require drivers for the PCI Simple Communications Controller.+ Hi George, As this laptop uses the Intel GM965/PM965 chipset, the unknown "PCI Simple Communications Controller" device is likely to be the Management Engine Interface. This is a component of the chipset that controls environmental monitoring (fan speeds, voltages, etc). On machines with Intel vPro technology, it also runs the Active Management Technology firmware to provide out-of-band management capabilities. You can verify whether this is in fact the case by checking the PCI Vendor/Device codes - double-click the entry in the Device Manager, click the "Details" tab, and from the "Property" drop-down select "Hardware Ids". The entries in the "Value" field will give you the vendor and device codes. If you see something like "PCI\VEN_8086&DEV_2A04..." then the vendor code is 8086 (i.e, Intel) and the device code is 2A04 (i.e, the Management Engine interface). That said, a driver should be readily available for this device. I presume that the HP driver you refer to is the one found at this link? http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.j sp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=335 7378&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=ob-58326-1 It links to this particular file: ftp://ftp.hp.com/pub/softpaq/sp38001-38500/sp38313.exe This is the Vista x86/x64 driver for the MEI device. *Update -* since I started to compose this response, I have managed to obtain a Compaq/HP 6910p notebook and I've just installed Windows 7 Ultimate on it. Yes, it seems that the "PCI Simple Communications Controller" is the MEI, as I thought. I have used the 32-bit x86 build of Windows 7 - if you are using x64 then the outcome might be different. I ran the SP38313.exe file and it does, indeed, give an error "this operating system is not supported". But! ..this is caused by a check in the Setup utility, which doesn't recognise Windows 7. *However,*++ the EXE file, when run, unpacks its contents to C:\SWSETUP\SP38313. Under that folder are the actual driver files that you need - in the \HECI subfolder, in the case of 32-bit Windows (the .sys file is the driver; the .cat and .inf are the descriptor INF and security signature). The following sequence allows installation of the driver: * go to Device Manager, double-click on the "PCI Simple Communications Controller" entry * in the device properties dialog, click on "Update Driver" * select "Browse my computer for driver software" * when prompted, enter the path to which the SP38313.EXE driver files have been unpacked - typically, C:\SWSETUP\SP38313\HECI. * click Next. In my case (I've tested it and written down what I did, step-by-step), this resulted in the message "Windows has successfully updated your driver software", and a new "Intel(R) Management Engine Interface" entry in the System Devices category of the Device Manager. As I said above, I haven't tested with the x64 version of Windows 7, but a similar principle should apply - just use C:\SWSETUP\SP38313\x64 as a path rather than \HECI. Let me know whether this helps. Good luck! -------------------------------------------------------------- To reply to this message visit the message page: http://communities.intel.com/message/69305#69305

1 0

Windows 7 warning
by George Bell 02 Oct '09

02 Oct '09

I know some of you are involved with company laptops, so you may wish to read on. Having installed Windows 7 (RTM) on a couple of systems and been extremely pleased with the vast improvement in performance, I decided to install it on a Compaq 6910p laptop. It had been running Vista Business, so on the face of it, SHOULD have been O.K. for W7. Naturally I ran the Windows 7 Compatibility checker (Albeit still in Beta) and was delighted that it came up with a clean bill of health. Since I was performing a clean install, I fully expected to have to update a zillion drivers, and indeed spent quite a few hours doing just that. But one has defied all attempts. It's the "PCI Simple Communications Controller". This is vital for the Wireless modem, if nothing else, and I really do want wireless working. Call Compaq, whose initial attitude was, "We don't support Windows 7", but when pushed and reminded that Microsoft say Vista's drivers work with W7, they pointed me to a download. However, seems the Intel drivers see W7, and tell you words to the effect of "This operating system is not supported". And for goodness knows what reason, Compatibility Mode is not available. Needless to say I've spent quite few hours now researching this on the Internet and have drawn a blank - even on Intel's own user lists. So be warned. George.

6 15

Windows 7 warning
by George Bell 02 Oct '09

02 Oct '09

I know some of you are involved with company laptops, so you may wish to read on. Having installed Windows 7 (RTM) on a couple of systems and been extremely pleased with the vast improvement in performance, I decided to install it on a Compaq 6910p laptop. It had been running Vista Business, so on the face of it, SHOULD have been O.K. for W7. Naturally I ran the Windows 7 Compatibility checker (Albeit still in Beta) and was delighted that it came up with a clean bill of health. Since I was performing a clean install, I fully expected to have to update a zillion drivers, and indeed spent quite a few hours doing just that. But one has defied all attempts. It's the "PCI Simple Communications Controller". This is vital for the Wireless modem, if nothing else, and I really do want wireless working. Call Compaq, whose initial attitude was, "We don't support Windows 7", but when pushed and reminded that Microsoft say Vista's drivers work with W7, they pointed me to a download. However, seems the Intel drivers see W7, and tell you words to the effect of "This operating system is not supported". And for goodness knows what reason, Compatibility Mode is not available. Needless to say I've spent quite few hours now researching this on the Internet and have drawn a blank - even on Intel's own user lists. So be warned. George.

1 0

o.t. vista, private please
by David Mehler 30 Sep '09

30 Sep '09

Hello, I'm assuming we have some vista users with screen readers? I'm having a time and that's polite getting vista optimally going, if that's possible. If anyone is good at it please reply off list i've got several unrelated issues. Thanks. Dave.

1 0

Possible Vmware JFW scripts
by Andrew Hodgson 30 Sep '09

30 Sep '09

Hi all, Came across this on the Vinux user list. Thanks. Andrew. -----Original Message----- From: vinux-development(a)googlegroups.com [mailto:vinux-development@googlegroups.com] On Behalf Of Chris Hallsworth Sent: 28 September 2009 19:39 To: vinux-development(a)googlegroups.com Subject: [VINUX] Announcement: VMware Scripts 1.0 is released! Hello all, Don has once again asked me to pass on the following announcement, which is below. Enjoy, and happy virtuallization! Hi Chris, Here is a package I hope is about 95% finished! I added a lot of functionality to Workstation to get information from the Summary dialogs (Alt + S), and navigate around this multi-page Summary dialog. Move to the list in the dialog with Alt + D. With several complex functions that the user is unaware of, it is possible to Tab around this dialog and get to all of the controls. The tree view in the optional Sidebar is I think, the best way to check tree status of all Virtual Machines. Again, there are a few functions that automatically report the status as you arrow up and down in the tree view. A few things I could not decide, since I am not a power user. 1. VMware normally does not place the focus anywhere in the application. Where is the best place to force the application to focus? I started writing a function, PlaceFocus, to determine which window was active and place the focus in an appropriate place. After using the application a little and attempting to magnify the screen enough to somewhat understand the layout, I might want to change that concept. A simpler approach would be to require that the Sidebar is enabled and place the focus on the Running and Favorites tree view in the Sidebar. It currently forces this focus when opening or switching to Workstation (AutoStartEvent) and when using Control + Tab (NexVMWindow) to switch between VM windows. What do you think? 2. In the VMware player, I added a script to start the selected VM in the Recently Opened VM list when the Enter key is pressed. I have not decided what action to take if the Enter key is pressed on a VM in the Running and Favorites tree view. There is a script for the Enter key, SelectVM, that can perform what we choose. It currently moves the focus to the Device Details list view on the Summary dialog. 3. I have debug SayMessage statements that help locate an issue if one arises. Most users should never be aware they are there. To make it easier to enable when needed, i have added the required lines in the jCF file. Since the JSX packager will not carry over comment lines whemn merging JCF files. I needed another approach. There are two choices. I currently have the Debug statements enabled when verbosity is set to Advanced. This of course, might piss off people who normally have verbosity set to addvanced! Anither option would be to have all 0's in the line below so that Debug statements are disabled until you open the JCF file in an text editor and change the appropriate 0 to a 1. Which do you think is best? [OutputModes] ; Will speak all of the OT_DEBUG messages when in Advanced Verbosity DEBUG=0|0|1|DEBUG Message There are a few minor things I need to fix, such as not being able to get back to the Summary dialog if you navigate to a optional Tab like "Package" that does not have a list view. I have not added logic yet to catch every strange situation such as the Sidebar not being present or in full screen. These are not difficult, but the questions above need to be decided. As usual. you or anyone else can get the latest (today) version at: http://mysite.verizon.net/marangs/VMware.html Feel free to spread the word and distribute our scripts when you think they are ready. Pass back any changes, comments, bugs, suggestions and ideas. I will do my best to work then into our package. Perhaps I should staart misspelling a few key words to make it more UK English? Like change "dialog" to "dialogue"? -- Chris Hallsworth E-mail: christopherh40(a)googlemail.com MSN: ch9675(a)hotmail.com Skype: chrishallsworth7266 Yahoo! Messenger: christopherh40(a)yahoo.com Klango: chrishallsworth __________ Information from ESET NOD32 Antivirus, version of virus signature database 4465 (20090928) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "The Vinux Development Forum" group. To post to this group, send email to vinux-development(a)googlegroups.com To unsubscribe from this group, send email to vinux-development+unsubscribe(a)googlegroups.com For more options, visit this group at http://groups.google.com/group/vinux-development?hl=en -~----------~----~----~----~------~----~------~--~---

4 5

Re: [Blind-sysadmins] Possible Vmware JFW scripts
by Frank Ventura 30 Sep '09

30 Sep '09

Ryan, wow, that really is pretty impressive. I think I will try Workstation out a bit. I have a MAPS subscription so I have a few choices as to Windows operating systems to experiment with. Thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Ryan Shugart Sent: Tuesday, September 29, 2009 1:31 PM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Frank, I'll write more later when I'm at an actual computer. But, the Easy Install feature supports Windows and Linux guests that I know of. You can use a CD, DVD or ISO image, and its just the normal immage. Once you point Workstation at the install media, it asks for a product key (on Windows), your full name and the admin password. It uses defaults for everything else, you're in a workgroup, etc. I've not installed SBS2003, I did try 2008 though. VMWare thought it was regular 2008, but got enough installed that I could use Narrator and get speech for the SBS specific part. Ryan -----Original Message----- From: Frank Ventura <Frank.Ventura(a)littlebreezes.com> Sent: Tuesday, September 29, 2009 8:47 AM To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Hi Ryan, I was not aware that you can point Workstation at a CD (can it be a DVD?) and it will do an automated install of the OS. Does the ISO Image or CD have to have the unattended install file on it or can it just be the usual factory retail install CD. If I crate a VM in workstation on physical machine x, can I just move it over to physical machine y and have it work, like I can with VPC's .VHD files? What operating systems are supported for that automated install trick? Where can I find this documented? I the case of something like Microsoft's SBS if I pointed Workstation at the DVD how far into the instllation does it get? How would it know what the domain and local machine names should be? Sorry for the bunch of questions but I wasn't aware of this and it may be a great concept. thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org on behalf of Ryan Shugart Sent: Tue 9/29/2009 9:55 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew: I've found Workstation very worth the money honestly. It's a really good product, and actually offers some features that would benefit a blind person. The biggest being when you create a new VM, you can point Workstation at the ISO image or CD of the OS you will use to install your VM, and Workstation will detect the OS and install it automatically, as well as load the appropriate version of VMWare tools. You can literly run through the new VM wizard, power on your VM, come back in a few minutes and have a working, with sound, virtual machine ready for screen reader installation. A very big deal in my book. If Workstation is still to expensive, give Player a look. Right now it will only read virtual machines made in Workstation, but my understanding is the next release will be more of a free Workstation light than just Player. Honestly on the whole I'm very pleased with VMWare's products. The VIC needs some work, but on a technical standpoint they're very soun d. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Tuesday, September 29, 2009 6:02 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Hi, Personally I have a test ESXI3 host that I use to do my tests on, at some point I want to get a 64-bit machine at work and use Windows 7 and the MS virtualization stuff with that or Vmware workstation (though that may be pricy for us). Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 29 September 2009 12:22 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew, what do you think is our best bet for accessible virtualization? What do you use? I liked VPC 2007 but I believe that there is no versionof that that can handle a 64 bit guest. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Tuesday, September 29, 2009 4:13 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Hi, As I don't use Vmware workstation I couldn't comment, I just forwarded it for information purposes. I tend not to install extra JFW scripts anyway, and make do with the out of box experience. Thanks. Andrew. ________________________________________ From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] On Behalf Of Ryan Shugart [rshugart(a)pcisys.net] Sent: 29 September 2009 00:32 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew: I don't use JFW so these scripts won't be of any use to me, but I use Workstation heavily every day, and haven't found it that in accessible, there's nothing I've found I can't get to at worse with the mouse. So I'm curious, what do these scripts let me access that I can't currently? I'd honestly much rather see scripts for the VIC, because while you can still navigate with the mouse, it takes a lot longer for a blind person than it would for a sighted person to perform similar tasks. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Monday, September 28, 2009 3:43 PM To: Blind sysadmins list Subject: [Blind-sysadmins] Possible Vmware JFW scripts Hi all, Came across this on the Vinux user list. Thanks. Andrew. -----Original Message----- From: vinux-development(a)googlegroups.com [mailto:vinux-development@googlegroups.com] On Behalf Of Chris Hallsworth Sent: 28 September 2009 19:39 To: vinux-development(a)googlegroups.com Subject: [VINUX] Announcement: VMware Scripts 1.0 is released! Hello all, Don has once again asked me to pass on the following announcement, which is below. Enjoy, and happy virtuallization! Hi Chris, Here is a package I hope is about 95% finished! I added a lot of functionality to Workstation to get information from the Summary dialogs (Alt + S), and navigate around this multi-page Summary dialog. Move to the list in the dialog with Alt + D. With several complex functions that the user is unaware of, it is possible to Tab around this dialog and get to all of the controls. The tree view in the optional Sidebar is I think, the best way to check tree status of all Virtual Machines. Again, there are a few functions that automatically report the status as you arrow up and down in the tree view. A few things I could not decide, since I am not a power user. 1. VMware normally does not place the focus anywhere in the application. Where is the best place to force the application to focus? I started writing a function, PlaceFocus, to determine which window was active and place the focus in an appropriate place. After using the application a little and attempting to magnify the screen enough to somewhat understand the layout, I might want to change that concept. A simpler approach would be to require that the Sidebar is enabled and place the focus on the Running and Favorites tree view in the Sidebar. It currently forces this focus when opening or switching to Workstation (AutoStartEvent) and when using Control + Tab (NexVMWindow) to switch between VM windows. What do you think? 2. In the VMware player, I added a script to start the selected VM in the Recently Opened VM list when the Enter key is pressed. I have not decided what action to take if the Enter key is pressed on a VM in the Running and Favorites tree view. There is a script for the Enter key, SelectVM, that can perform what we choose. It currently moves the focus to the Device Details list view on the Summary dialog. 3. I have debug SayMessage statements that help locate an issue if one arises. Most users should never be aware they are there. To make it easier to enable when needed, i have added the required lines in the jCF file. Since the JSX packager will not carry over comment lines whemn merging JCF files. I needed another approach. There are two choices. I currently have the Debug statements enabled when verbosity is set to Advanced. This of course, might piss off people who normally have verbosity set to addvanced! Anither option would be to have all 0's in the line below so that Debug statements are disabled until you open the JCF file in an text editor and change the appropriate 0 to a 1. Which do you think is best? [OutputModes] ; Will speak all of the OT_DEBUG messages when in Advanced Verbosity DEBUG=0|0|1|DEBUG Message There are a few minor things I need to fix, such as not being able to get back to the Summary dialog if you navigate to a optional Tab like "Package" that does not have a list view. I have not added logic yet to catch every strange situation such as the Sidebar not being present or in full screen. These are not difficult, but the questions above need to be decided. As usual. you or anyone else can get the latest (today) version at: http://mysite.verizon.net/marangs/VMware.html Feel free to spread the word and distribute our scripts when you think they are ready. Pass back any changes, comments, bugs, suggestions and ideas. I will do my best to work then into our package. Perhaps I should staart misspelling a few key words to make it more UK English? Like change "dialog" to "dialogue"? -- Chris Hallsworth E-mail: christopherh40(a)googlemail.com MSN: ch9675(a)hotmail.com Skype: chrishallsworth7266 Yahoo! Messenger: christopherh40(a)yahoo.com Klango: chrishallsworth __________ Information from ESET NOD32 Antivirus, version of virus signature database 4465 (20090928) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "The Vinux Development Forum" group. To post to this group, send email to vinux-development(a)googlegroups.com To unsubscribe from this group, send email to vinux-development+unsubscribe(a)googlegroups.com For more options, visit this group at http://groups.google.com/group/vinux-development?hl=en -~----------~----~----~----~------~----~------~--~--- _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 2

Re: [Blind-sysadmins] Possible Vmware JFW scripts
by Ryan Shugart 29 Sep '09

29 Sep '09

I didn't think User Mode Linux let you run Windows guests, does it? Ryan -----Original Message----- From: Scott Granados <scott(a)granados-llc.net> Sent: Tuesday, September 29, 2009 10:23 AM To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts What about User Mode Linux? I run that pretty succesfully and it's good for quick prototyping / testing. ----- Original Message ----- From: "Frank Ventura" <Frank.Ventura(a)littlebreezes.com> To: "Blind sysadmins list" <blind-sysadmins(a)lists.hodgsonfamily.org> Sent: Tuesday, September 29, 2009 4:21 AM Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew, what do you think is our best bet for accessible virtualization? What do you use? I liked VPC 2007 but I believe that there is no versionof that that can handle a 64 bit guest. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Tuesday, September 29, 2009 4:13 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Hi, As I don't use Vmware workstation I couldn't comment, I just forwarded it for information purposes. I tend not to install extra JFW scripts anyway, and make do with the out of box experience. Thanks. Andrew. ________________________________________ From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] On Behalf Of Ryan Shugart [rshugart(a)pcisys.net] Sent: 29 September 2009 00:32 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew: I don't use JFW so these scripts won't be of any use to me, but I use Workstation heavily every day, and haven't found it that in accessible, there's nothing I've found I can't get to at worse with the mouse. So I'm curious, what do these scripts let me access that I can't currently? I'd honestly much rather see scripts for the VIC, because while you can still navigate with the mouse, it takes a lot longer for a blind person than it would for a sighted person to perform similar tasks. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Monday, September 28, 2009 3:43 PM To: Blind sysadmins list Subject: [Blind-sysadmins] Possible Vmware JFW scripts Hi all, Came across this on the Vinux user list. Thanks. Andrew. -----Original Message----- From: vinux-development(a)googlegroups.com [mailto:vinux-development@googlegroups.com] On Behalf Of Chris Hallsworth Sent: 28 September 2009 19:39 To: vinux-development(a)googlegroups.com Subject: [VINUX] Announcement: VMware Scripts 1.0 is released! Hello all, Don has once again asked me to pass on the following announcement, which is below. Enjoy, and happy virtuallization! Hi Chris, Here is a package I hope is about 95% finished! I added a lot of functionality to Workstation to get information from the Summary dialogs (Alt + S), and navigate around this multi-page Summary dialog. Move to the list in the dialog with Alt + D. With several complex functions that the user is unaware of, it is possible to Tab around this dialog and get to all of the controls. The tree view in the optional Sidebar is I think, the best way to check tree status of all Virtual Machines. Again, there are a few functions that automatically report the status as you arrow up and down in the tree view. A few things I could not decide, since I am not a power user. 1. VMware normally does not place the focus anywhere in the application. Where is the best place to force the application to focus? I started writing a function, PlaceFocus, to determine which window was active and place the focus in an appropriate place. After using the application a little and attempting to magnify the screen enough to somewhat understand the layout, I might want to change that concept. A simpler approach would be to require that the Sidebar is enabled and place the focus on the Running and Favorites tree view in the Sidebar. It currently forces this focus when opening or switching to Workstation (AutoStartEvent) and when using Control + Tab (NexVMWindow) to switch between VM windows. What do you think? 2. In the VMware player, I added a script to start the selected VM in the Recently Opened VM list when the Enter key is pressed. I have not decided what action to take if the Enter key is pressed on a VM in the Running and Favorites tree view. There is a script for the Enter key, SelectVM, that can perform what we choose. It currently moves the focus to the Device Details list view on the Summary dialog. 3. I have debug SayMessage statements that help locate an issue if one arises. Most users should never be aware they are there. To make it easier to enable when needed, i have added the required lines in the jCF file. Since the JSX packager will not carry over comment lines whemn merging JCF files. I needed another approach. There are two choices. I currently have the Debug statements enabled when verbosity is set to Advanced. This of course, might piss off people who normally have verbosity set to addvanced! Anither option would be to have all 0's in the line below so that Debug statements are disabled until you open the JCF file in an text editor and change the appropriate 0 to a 1. Which do you think is best? [OutputModes] ; Will speak all of the OT_DEBUG messages when in Advanced Verbosity DEBUG=0|0|1|DEBUG Message There are a few minor things I need to fix, such as not being able to get back to the Summary dialog if you navigate to a optional Tab like "Package" that does not have a list view. I have not added logic yet to catch every strange situation such as the Sidebar not being present or in full screen. These are not difficult, but the questions above need to be decided. As usual. you or anyone else can get the latest (today) version at: http://mysite.verizon.net/marangs/VMware.html Feel free to spread the word and distribute our scripts when you think they are ready. Pass back any changes, comments, bugs, suggestions and ideas. I will do my best to work then into our package. Perhaps I should staart misspelling a few key words to make it more UK English? Like change "dialog" to "dialogue"? -- Chris Hallsworth E-mail: christopherh40(a)googlemail.com MSN: ch9675(a)hotmail.com Skype: chrishallsworth7266 Yahoo! Messenger: christopherh40(a)yahoo.com Klango: chrishallsworth __________ Information from ESET NOD32 Antivirus, version of virus signature database 4465 (20090928) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "The Vinux Development Forum" group. To post to this group, send email to vinux-development(a)googlegroups.com To unsubscribe from this group, send email to vinux-development+unsubscribe(a)googlegroups.com For more options, visit this group at http://groups.google.com/group/vinux-development?hl=en -~----------~----~----~----~------~----~------~--~--- _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0

Re: [Blind-sysadmins] Possible Vmware JFW scripts
by Ryan Shugart 29 Sep '09

29 Sep '09

I didn't think User Mode Linux let you run Windows guests, does it? Ryan -----Original Message----- From: Scott Granados <scott(a)granados-llc.net> Sent: Tuesday, September 29, 2009 10:23 AM To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts What about User Mode Linux? I run that pretty succesfully and it's good for quick prototyping / testing. ----- Original Message ----- From: "Frank Ventura" <Frank.Ventura(a)littlebreezes.com> To: "Blind sysadmins list" <blind-sysadmins(a)lists.hodgsonfamily.org> Sent: Tuesday, September 29, 2009 4:21 AM Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew, what do you think is our best bet for accessible virtualization? What do you use? I liked VPC 2007 but I believe that there is no versionof that that can handle a 64 bit guest. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Tuesday, September 29, 2009 4:13 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Hi, As I don't use Vmware workstation I couldn't comment, I just forwarded it for information purposes. I tend not to install extra JFW scripts anyway, and make do with the out of box experience. Thanks. Andrew. ________________________________________ From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [blind-sysadmins-bounces(a)lists.hodgsonfamily.org] On Behalf Of Ryan Shugart [rshugart(a)pcisys.net] Sent: 29 September 2009 00:32 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Possible Vmware JFW scripts Andrew: I don't use JFW so these scripts won't be of any use to me, but I use Workstation heavily every day, and haven't found it that in accessible, there's nothing I've found I can't get to at worse with the mouse. So I'm curious, what do these scripts let me access that I can't currently? I'd honestly much rather see scripts for the VIC, because while you can still navigate with the mouse, it takes a lot longer for a blind person than it would for a sighted person to perform similar tasks. Ryan -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Monday, September 28, 2009 3:43 PM To: Blind sysadmins list Subject: [Blind-sysadmins] Possible Vmware JFW scripts Hi all, Came across this on the Vinux user list. Thanks. Andrew. -----Original Message----- From: vinux-development(a)googlegroups.com [mailto:vinux-development@googlegroups.com] On Behalf Of Chris Hallsworth Sent: 28 September 2009 19:39 To: vinux-development(a)googlegroups.com Subject: [VINUX] Announcement: VMware Scripts 1.0 is released! Hello all, Don has once again asked me to pass on the following announcement, which is below. Enjoy, and happy virtuallization! Hi Chris, Here is a package I hope is about 95% finished! I added a lot of functionality to Workstation to get information from the Summary dialogs (Alt + S), and navigate around this multi-page Summary dialog. Move to the list in the dialog with Alt + D. With several complex functions that the user is unaware of, it is possible to Tab around this dialog and get to all of the controls. The tree view in the optional Sidebar is I think, the best way to check tree status of all Virtual Machines. Again, there are a few functions that automatically report the status as you arrow up and down in the tree view. A few things I could not decide, since I am not a power user. 1. VMware normally does not place the focus anywhere in the application. Where is the best place to force the application to focus? I started writing a function, PlaceFocus, to determine which window was active and place the focus in an appropriate place. After using the application a little and attempting to magnify the screen enough to somewhat understand the layout, I might want to change that concept. A simpler approach would be to require that the Sidebar is enabled and place the focus on the Running and Favorites tree view in the Sidebar. It currently forces this focus when opening or switching to Workstation (AutoStartEvent) and when using Control + Tab (NexVMWindow) to switch between VM windows. What do you think? 2. In the VMware player, I added a script to start the selected VM in the Recently Opened VM list when the Enter key is pressed. I have not decided what action to take if the Enter key is pressed on a VM in the Running and Favorites tree view. There is a script for the Enter key, SelectVM, that can perform what we choose. It currently moves the focus to the Device Details list view on the Summary dialog. 3. I have debug SayMessage statements that help locate an issue if one arises. Most users should never be aware they are there. To make it easier to enable when needed, i have added the required lines in the jCF file. Since the JSX packager will not carry over comment lines whemn merging JCF files. I needed another approach. There are two choices. I currently have the Debug statements enabled when verbosity is set to Advanced. This of course, might piss off people who normally have verbosity set to addvanced! Anither option would be to have all 0's in the line below so that Debug statements are disabled until you open the JCF file in an text editor and change the appropriate 0 to a 1. Which do you think is best? [OutputModes] ; Will speak all of the OT_DEBUG messages when in Advanced Verbosity DEBUG=0|0|1|DEBUG Message There are a few minor things I need to fix, such as not being able to get back to the Summary dialog if you navigate to a optional Tab like "Package" that does not have a list view. I have not added logic yet to catch every strange situation such as the Sidebar not being present or in full screen. These are not difficult, but the questions above need to be decided. As usual. you or anyone else can get the latest (today) version at: http://mysite.verizon.net/marangs/VMware.html Feel free to spread the word and distribute our scripts when you think they are ready. Pass back any changes, comments, bugs, suggestions and ideas. I will do my best to work then into our package. Perhaps I should staart misspelling a few key words to make it more UK English? Like change "dialog" to "dialogue"? -- Chris Hallsworth E-mail: christopherh40(a)googlemail.com MSN: ch9675(a)hotmail.com Skype: chrishallsworth7266 Yahoo! Messenger: christopherh40(a)yahoo.com Klango: chrishallsworth __________ Information from ESET NOD32 Antivirus, version of virus signature database 4465 (20090928) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "The Vinux Development Forum" group. To post to this group, send email to vinux-development(a)googlegroups.com To unsubscribe from this group, send email to vinux-development+unsubscribe(a)googlegroups.com For more options, visit this group at http://groups.google.com/group/vinux-development?hl=en -~----------~----~----~----~------~----~------~--~--- _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0