- Plextalk - lists.hodgsonfamily.org

ptr2 auto gain
by Rich Cavallaro 04 Nov '16

04 Nov '16

Hi, Am I correct that you can only adjust the input level for external microphone and line in recordings on the ptr2? The built in microphone is limited to just auto gain?

1 0

Mike for the plex talk 2
by Penny Golden 01 Nov '16

01 Nov '16

Hi. I have a little sony stereo mike for the plextalk two. But is there something else that I could get that would record more bass and, oh, I don't know the terms; but I'd like something that would do it better justice. Any ideas? Thank you. Penny pengold2(a)gmail.com

2 4

ptr2 battery
by Rich Cavallaro 31 Oct '16

31 Oct '16

Is 3 the highest level the ptr2 battery indicator should say? The unit is still charging-not sure if this being stuck at level 3 when unplugged may mean that I need a new battery? Rich Cavallaro

5 15

ptr2 battery
by Rich Cavallaro 28 Oct '16

28 Oct '16

Is 3 the highest level the ptr2 battery indicator should say? The unit is still charging-not sure if this being stuck at level 3 when unplugged may mean that I need a new battery? Rich Cavallaro

1 0

USB Cable for ptr2
by Rich Cavallaro 28 Oct '16

28 Oct '16

Hi all, What kind of USB cable does the ptr2 use to connect it to a computer?

6 9

USB Cable for ptr2
by Rich Cavallaro 28 Oct '16

28 Oct '16

Hi all, What kind of USB cable does the ptr2 use to connect it to a computer?

1 0

ptr2 and compact flash cards
by Rich Cavallaro 26 Oct '16

26 Oct '16

Hello all, I just bought a used Plextalk PTR2. What is the largest compact flash card one can use with the ptr2? Rich Cavallaro

2 1

ptr2 and compact flash cards
by Rich Cavallaro 26 Oct '16

26 Oct '16

Hello all, I just bought a used Plextalk PTR2. What is the largest compact flash card one can use with the ptr2? Rich Cavallaro

1 0

Re: [Plextalk] AC Adapter: No battery installed, or when off AC, 'battery level 0%' .
by Flor Lynch 22 Oct '16

22 Oct '16

Peter, I can understand why you'd be hesitant to try the Linio adapter with the PTP. I bought a second Plextalk Pocket in about September 2014, as first, the power unit supplied with my older one failed, in that when it was connected to AC, it did not charge the battery. (The battery percentage went down while connected with it.) So it was determined that a new power supply was necessary. While waiting for that to come, I tried out some other plugs and they did work (to a degree) to recharge the battery. But I had the misfortune to break the power socket of the PTP (in attempting to make it give me the connect/disconnect sound with the adaptor I was using at the time, which seemed to fit perfectly but didn't give me the sound. After that, the new power supply came, bbut I had decided in the interim between the break and it that the best thing was to get a new Plextalk Pocket altogether, given the difficulty of fixing broken AC sockets like these. So I now need to 'isolate' the problem I am now having, if possible. I'm charging up the battery that came with my old Plextalk, in the hope that, in the event of it reaching full charge, it may give me a proper percentage while I use it in my newer Plextalk. I've been told that if I styill hear the connect/disconnect sound, which I do (though not as often as I'd like to), that means that the socket is still getting power. And the PTP says, "AC adapter. No battery installed." I guess we'll find out fairly soon whether it's a battery problem or not. -----Original Message----- From: peter wilkins Sent: Monday, October 17, 2016 3:15 PM To: Plextalk User Discussion List Subject: Re: [Plextalk] AC Adapter: No battery installed, or when off AC, 'battery level 0%' . Hello Flor. I had two power supplies, and both of them seemed to fail. I know it's the same, but I don't want to try my Linio supply in either of the PTP1's. All my units and power supplies are appropriately labelled in Braille, as is the same for all my plugs and chargers. Keep well. Peter _______________________________________________ Plextalk mailing list Plextalk(a)lists.hodgsonfamily.org https://lists.hodgsonfamily.org/listinfo/plextalk

2 3

Re: [Plextalk] AC Adapter: No battery installed, or when off AC, 'battery level 0%' .
by peter wilkins 17 Oct '16

17 Oct '16

Hello Flor. I had two power supplies, and both of them seemed to fail. I know it's the same, but I don't want to try my Linio supply in either of the PTP1's. All my units and power supplies are appropriately labelled in Braille, as is the same for all my plugs and chargers. Keep well. Peter

1 0