- Blind-sysadmins - lists.hodgsonfamily.org

Configuring an FTP Server
by Barry Toner 29 Aug '11

29 Aug '11

Hi Folks, I haven't done this in about 4 years, and am coming a bit unstuck. I could really do with some thoughts on the below. Where I'm coming from... When i ran an FTP server back in the day, I was using XP with it's, (cauf, cauf), Firewall, Eset NOD32 AV, ServU FTP Server and a Linksys WRT 54G. How life seemed much more simple... Now, the box I'm going to use for the Server has Windows 7, a Draytek Router and File Zilla Server. It also has Windows Firewall & Eset Smart Security. I've installed FS Server and created a test account. I've set my Desktop up with a Static IP on the LAN. Giving the Drayteks IP as the Gateway, and the DNS Server it specified. Connection to other machines on the LAN and out to the Internet is fine. I cant' get a connection into my FTP Server. I've read here, http://www.draytek.co.uk/support/kb_vigor_portforwarding.html how to "Open a port" on the Draytek. I specified the IP for the box the Servers running on. Applied the setting,and confirmed it was in the Port Forwarding table, with start and end ports of 21. I temporarily turned off both Windows Firewall & esets Firewall, then went to, http://ftptest.net/ To test the connection from outside the LAN. It's still timing out, and the Servers showing no attempts in the log. It's not getting through somewhere... I did spy something in FZs' FAQ here http://goo.gl/mlydm regarding Passive Mode. I didnt' understand if this was absolutely necessary. It's been a long time and I remember people could connect using (Active, used to be the default mode), or Passive in their client. The above article, talks about settings in FZ, sticking it to an IP and custum port between 5000 and 5100. It doesn't mention if I did this if I'd then also need to open these ports on my router. FYI, File Zilla reports that it is Online and not Locked. NB. I will more than likely leave Windows Firewall disabled and figure out how to create a rule in Esets Firewall for the server once I confirm it's coming through the draytek, i'll worry about the software stuff. Also, I'm going to use something like a Dynamic DNS client once I've got the connection working. The ISP, I seriously doubt would happily hand out a Static IPv4 address to me these days. Any thoughts of what to try next? Cheers, Barry.

5 15

Configuring an FTP Server
by Barry Toner 25 Aug '11

25 Aug '11

Hi Folks, I haven't done this in about 4 years, and am coming a bit unstuck. I could really do with some thoughts on the below. Where I'm coming from... When i ran an FTP server back in the day, I was using XP with it's, (cauf, cauf), Firewall, Eset NOD32 AV, ServU FTP Server and a Linksys WRT 54G. How life seemed much more simple... Now, the box I'm going to use for the Server has Windows 7, a Draytek Router and File Zilla Server. It also has Windows Firewall & Eset Smart Security. I've installed FS Server and created a test account. I've set my Desktop up with a Static IP on the LAN. Giving the Drayteks IP as the Gateway, and the DNS Server it specified. Connection to other machines on the LAN and out to the Internet is fine. I cant' get a connection into my FTP Server. I've read here, http://www.draytek.co.uk/support/kb_vigor_portforwarding.html how to "Open a port" on the Draytek. I specified the IP for the box the Servers running on. Applied the setting,and confirmed it was in the Port Forwarding table, with start and end ports of 21. I temporarily turned off both Windows Firewall & esets Firewall, then went to, http://ftptest.net/ To test the connection from outside the LAN. It's still timing out, and the Servers showing no attempts in the log. It's not getting through somewhere... I did spy something in FZs' FAQ here http://goo.gl/mlydm regarding Passive Mode. I didnt' understand if this was absolutely necessary. It's been a long time and I remember people could connect using (Active, used to be the default mode), or Passive in their client. The above article, talks about settings in FZ, sticking it to an IP and custum port between 5000 and 5100. It doesn't mention if I did this if I'd then also need to open these ports on my router. FYI, File Zilla reports that it is Online and not Locked. NB. I will more than likely leave Windows Firewall disabled and figure out how to create a rule in Esets Firewall for the server once I confirm it's coming through the draytek, i'll worry about the software stuff. Also, I'm going to use something like a Dynamic DNS client once I've got the connection working. The ISP, I seriously doubt would happily hand out a Static IPv4 address to me these days. Any thoughts of what to try next? Cheers, Barry.

1 0

Accessible system deployment software and accessible remote control software
by Kathryn Jedynak 16 Aug '11

16 Aug '11

Hello everyone: My name is Kathryn and I recently started working in a desktop support position. I am wondering if there are any system deployment software that is screen reader friendly. Our company looked at acronus deployment suite but this is not very accessible. Also, is there any remote control software that is accessible besides rim from Serotek? Best, Kathryn

5 7

Accessible system deployment software and accessible remote control software
by Kathryn Jedynak 16 Aug '11

16 Aug '11

Hello everyone: My name is Kathryn and I recently started working in a desktop support position. I am wondering if there are any system deployment software that is screen reader friendly. Our company looked at acronus deployment suite but this is not very accessible. Also, is there any remote control software that is accessible besides rim from Serotek? Best, Kathryn

1 0

NVDA remote to windows 7
by David Mehler 13 Aug '11

13 Aug '11

Hello, I've got a Dell Inspiron Desktop 64 bit running Windows 7 home Premium. It's got NVDA 2010.2 on it and it is several hundred miles away from me. That's the back story, bad news is this box is having a problem that I need to remote to to correct. I'm wondering if I can do this NVDA to NVDA also any machine I would use from this end is only 32 bit. Some urgency! I would appreciate any suggestions. Thanks. Dave.

6 17

NVDA remote to windows 7
by David Mehler 12 Aug '11

12 Aug '11

Hello, I've got a Dell Inspiron Desktop 64 bit running Windows 7 home Premium. It's got NVDA 2010.2 on it and it is several hundred miles away from me. That's the back story, bad news is this box is having a problem that I need to remote to to correct. I'm wondering if I can do this NVDA to NVDA also any machine I would use from this end is only 32 bit. Some urgency! I would appreciate any suggestions. Thanks. Dave.

1 0

Diagnosing local or isp issue
by Ben Mustill-Rose 09 Aug '11

09 Aug '11

Hey all, I don't really like speaking with my isp's tech support, so I was wondering if anyone could suggest a few things to try in my situation to try and determin if the below is a problem at my end or the isp's? I have a fairly old (DG834G bought in 2006) modem / router / access point combo which has been working very well up until now. Every few days, the wan connection will get dropped and I have to reboot it until it comes back up; this can take quite a few reboots. It always shows as connected in the web interface - I can see upload and download speeds, but I don't get an ip from the isp. I've tried flashing the firmware, new cables and different micro filters all with no affect which has taken quite a while since it might work fine for days then all of a sudden fail. I considered using a computer with a usb modem and internet connection sharing connected to a switch to see if the issue goes away, but I'm really reluctant to have a windows box facing the internet on my network so I'd rather not. Using a different line is possible but would require quite a bit of rearranging, so unless people think it might help, again, I'd rather not. >From reading other peoples posts on forums, it seems like my isp is a bit reluctant to help with this sort of thing until you can proov that its not a problem at your end - they walk you through a troubleshooting document and then they ask bt to run a test on the line which takes 30 days. Does anyone have any ideas about what I could try? Cheers, Ben.

3 8

Wireshark again.
by Darragh OHeiligh 09 Aug '11

09 Aug '11

This wireshark stuff is brilliant. I've had a reason to read up on it over the past while however it's accessibility leaves a lot to be desired. It seems to be using non standard colors or something for menus. When I add them to the custom highlight assignment then sometimes they read reasonably well but it's still not usable. I know that someone better with Jaws scripting would have a lot more luck very quickly with this and I also know that it would benefit many a blind sys admin so I'm asking if someone would mind trying to make it speak? Regards Darragh Ó Héiligh Fujitsu Offices of the Houses of the Oireachtas, Fredrick Building, South Fredrick Street, Dublin2 Telephone: +353 (1) 618 3559 Email: darragh.oheiligh(a)oireachtas.ie Internet: http://www.oireachtas.ie

4 7

Diagnosing local or isp issue
by Ben Mustill-Rose 08 Aug '11

08 Aug '11

Hey all, I don't really like speaking with my isp's tech support, so I was wondering if anyone could suggest a few things to try in my situation to try and determin if the below is a problem at my end or the isp's? I have a fairly old (DG834G bought in 2006) modem / router / access point combo which has been working very well up until now. Every few days, the wan connection will get dropped and I have to reboot it until it comes back up; this can take quite a few reboots. It always shows as connected in the web interface - I can see upload and download speeds, but I don't get an ip from the isp. I've tried flashing the firmware, new cables and different micro filters all with no affect which has taken quite a while since it might work fine for days then all of a sudden fail. I considered using a computer with a usb modem and internet connection sharing connected to a switch to see if the issue goes away, but I'm really reluctant to have a windows box facing the internet on my network so I'd rather not. Using a different line is possible but would require quite a bit of rearranging, so unless people think it might help, again, I'd rather not. >From reading other peoples posts on forums, it seems like my isp is a bit reluctant to help with this sort of thing until you can proov that its not a problem at your end - they walk you through a troubleshooting document and then they ask bt to run a test on the line which takes 30 days. Does anyone have any ideas about what I could try? Cheers, Ben.

1 0

Wireshark again.
by Darragh OHeiligh 08 Aug '11

08 Aug '11

This wireshark stuff is brilliant. I've had a reason to read up on it over the past while however it's accessibility leaves a lot to be desired. It seems to be using non standard colors or something for menus. When I add them to the custom highlight assignment then sometimes they read reasonably well but it's still not usable. I know that someone better with Jaws scripting would have a lot more luck very quickly with this and I also know that it would benefit many a blind sys admin so I'm asking if someone would mind trying to make it speak? Regards Darragh Ó Héiligh Fujitsu Offices of the Houses of the Oireachtas, Fredrick Building, South Fredrick Street, Dublin2 Telephone: +353 (1) 618 3559 Email: darragh.oheiligh(a)oireachtas.ie Internet: http://www.oireachtas.ie

1 0