- Blind-sysadmins - lists.hodgsonfamily.org

any juniper srx users out there?
by Scott Granados 24 Feb '10

24 Feb '10

Hi, so I have a configuration from a Juniper srx210 I'm having issue with. I have the source nat defined, interfaces defined, zone rules defined and can't get traffic to work outbound. My source nat rule-set shows matches (many) so I think that part is working. Anyone familiar with these devices and could review my config and see what I'm missing. I'm pretty new to Junos, especially on firewalls, so could definitely use some pointers. Thanks Scott

1 0

Ubuntu unattended install
by David Mehler 30 Jan '10

30 Jan '10

Hi, I was wondering if anyone had done an unattended install of ubuntu 9.0 server? I was wanting to remaster a server CD so that drop it in a box it loads up and does a customized unattended install. Thanks. Dave.

1 0

Re: [Blind-sysadmins] Using Outlook 2007/Exchange2007 withshared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Ah, OK thanks. That makes more sense. Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 9:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange2007 withshared calendars and JFW Hi, Oops I meant J-Tools. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 14:24 To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Andrew, thanks did you mean the J-Tools or J-Say. If I am reading that site correctly the J-Say is for Draggon speach recognition only. But, the J-Tools has a few references to Outlook calendars. thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 8:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Hi, As far as I know the only reliable way of doing this is to use the J-Say scripts from Brian Hartgen http://www.tandt-consultancy.com Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 13:24 To: Blind sysadmins list Subject: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 with shared calendars and JFW Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

1 0

Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Andrew, thanks did you mean the J-Tools or J-Say. If I am reading that site correctly the J-Say is for Draggon speach recognition only. But, the J-Tools has a few references to Outlook calendars. thanks Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Andrew Hodgson Sent: Thursday, January 28, 2010 8:41 AM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 withshared calendars and JFW Hi, As far as I know the only reliable way of doing this is to use the J-Say scripts from Brian Hartgen http://www.tandt-consultancy.com Thanks. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Frank Ventura Sent: 28 January 2010 13:24 To: Blind sysadmins list Subject: [Blind-sysadmins] Using Outlook 2007/Exchange 2007 with shared calendars and JFW Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins -- allpay achieved PCI DSS and ISO 27001 certification in 2008 Registered in England No. 02933191. UK VAT Reg. No. 666 9148 88. Telephone: 0844 225 5729, Fax: 0844 557 8350. Website: www.allpay.net Email: enquiries(a)allpay.net This email, and any files transmitted with it, is confidential and intended solely for the use of the individual or entity to whom it is addressed. If you have received this email in error please notify the allpay Information Security Manager at the number above. _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

2 1

Using Outlook 2007/Exchange 2007 with shared calendars and JFW
by Frank Ventura 28 Jan '10

28 Jan '10

Hi all, I have a client of mine who is using Outlook 2007 with JFW 10. She manages about four or five shared calendars. As part of her job duties she has to find open time slots on all of those calendars. The way to do this in Outlook 2007 is to use overlay mode which you can get to by selecting the calendars you want in the navigation pane and choosing "Overlay" from the view menu. Visually what this does is put appointments from all selected calendars into one view so that empty time slots are very obvious. The problem we are having is that JFW is only reading appointments from the last selected calendar. Does anyone have any suggestions as to how to get Overlay mode to work in JFW? I have tried this with JFW 10 and 11 with no luck. Thanks Frank Ventura

2 1

Exchange Server 2003 and Windows 7 Ultimate 64 bit.
by George Bell 25 Jan '10

25 Jan '10

I'm banging my head against concrete here, and wondered if any of you have experience of Outlook 2007 and Windows 7 Ultimate 64 bit, accessing an Exchange 2003 Server at my office from my home desktop. I have access via the same Virgin Netgear Router here at home via my laptop which has Windows Professional 32 bit and Outlook 2003. As far as I can see, the Dray Tek Smart VPN Client is set up identically tio the laptop. I know for sure that the VPN is connected, as I can access any of the server's drives, and even Remore Desktop to the server. But whatever I try, I keep being told that the Exchange Server is not available. However, what has got be a tad suspicious, is that I have a similar problem accessing an America supplier's server using the same Username and Password as I do onloy my laptop, which suggests that I may be missing something 64 bit specific. Has anyone any thoughts? George.

3 13

Exchange Server 2003 and Windows 7 Ultimate 64 bit.
by George Bell 25 Jan '10

25 Jan '10

I'm banging my head against concrete here, and wondered if any of you have experience of Outlook 2007 and Windows 7 Ultimate 64 bit, accessing an Exchange 2003 Server at my office from my home desktop. I have access via the same Virgin Netgear Router here at home via my laptop which has Windows Professional 32 bit and Outlook 2003. As far as I can see, the Dray Tek Smart VPN Client is set up identically tio the laptop. I know for sure that the VPN is connected, as I can access any of the server's drives, and even Remore Desktop to the server. But whatever I try, I keep being told that the Exchange Server is not available. However, what has got be a tad suspicious, is that I have a similar problem accessing an America supplier's server using the same Username and Password as I do onloy my laptop, which suggests that I may be missing something 64 bit specific. Has anyone any thoughts? George.

1 0

Re: [Blind-sysadmins] [BW] cisco networking academyfor the visionimpaired offering classes for 2010
by Frank Ventura 13 Jan '10

13 Jan '10

What did they have you do in the lab portion for your CCNA and how doable was it without sight? Frank -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Scott Granados Sent: Tuesday, January 12, 2010 6:36 PM To: Blind sysadmins list Subject: Re: [Blind-sysadmins] [BW] cisco networking academyfor the visionimpaired offering classes for 2010 When I tested and this was a while ago and for a different cisco cert but they waved the time requirement and also provided an extra day for the lab. Not sure if this is standard though. ----- Original Message ----- From: "Andrew Hodgson" <andrew(a)hodgsonfamily.org> To: "Blind sysadmins list" <blind-sysadmins(a)lists.hodgsonfamily.org> Sent: Tuesday, January 12, 2010 2:58 PM Subject: Re: [Blind-sysadmins] [BW] cisco networking academy for the visionimpaired offering classes for 2010 Hi, I would be interested in finding out how many people take this to the CCNA exams. I did the old-style CCNA study 1 through 4, but kept failing the actual exams, , one reason for which was that by the time the reader read out the question, I was using all my extra time up. Andrew. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of Barry Toner Sent: 12 January 2010 22:18 To: 'Blind sysadmins list' Subject: Re: [Blind-sysadmins] [BW] cisco networking academy for the vision impaired offering classes for 2010 I had a look as well. I'd really like to sign-up but would like to see some pricing etc on the site before hand. Barry. -----Original Message----- From: blind-sysadmins-bounces(a)lists.hodgsonfamily.org [mailto:blind-sysadmins-bounces@lists.hodgsonfamily.org] On Behalf Of taylor scott Sent: Tuesday, January 12, 2010 4:44 AM To: blindwebbers(a)yahoogroups.com Cc: WomenOfTheBook; Blind sysadmins list Subject: Re: [Blind-sysadmins] [BW] cisco networking academy for the vision impaired offering classes for 2010 Hello all, I know this is sort of off topic for this list. I was just wondering, has anyone else looked into this, or actually done this? I am looking in to the CCNA Discovery, but the site ciscovision.org isn't to detailing. On 1/11/10, Jackie McBride <abletec(a)gmail.com> wrote: > The cisco Networking Academy for the Visually impaired out of Perth, > Western Australia, is offering classes beginning in February, 2010. > Classes being offered are I T Essentials 1 & CCNA Discovery. For more > information & to apply, contact > caviinfo(a)gmail.com > > You may also wish to visit > www.ciscovision.org > > The site is under construction at present but does contain some useful > information. > > Students from all over the world are welcome as lectures are done > online using Ventrilo & are also recorded for listening for those > unable to attend. > > -- > Change the world--1 deed at a time > Jackie McBride > www.abletec.serverheaven.net > Please join me Saturday, 11/7, on my walk against breast cancer by > making a donation at: > http://main.acsevents.org/goto/larkspur> > _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins __________ Information from ESET Smart Security, version of virus signature database 4764 (20100112) __________ The message was checked by ESET Smart Security. http://www.eset.com __________ Information from ESET Smart Security, version of virus signature database 4765 (20100112) __________ The message was checked by ESET Smart Security. http://www.eset.com _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins _______________________________________________ Blind-sysadmins mailing list Blind-sysadmins(a)lists.hodgsonfamily.org http://lists.hodgsonfamily.org/mailman/listinfo/blind-sysadmins

3 2

Telephony systems
by Andrew Hodgson 12 Jan '10

12 Jan '10

Hi all, Our current Call Manager 4.x servers are creaking under their age, and we are looking at replacing this either with a new Cisco telephony system or a completely new system altogether. The system has to use IP as the connection to the handsets, as we don't want to add in more cables. Has anyone any experience in deploying a new Call manager setup, or a similar telephony system, and how was the accessibility? Thanks. Andrew.

1 0

cisco networking academy for the vision impaired offering classes for 2010
by Jackie McBride 12 Jan '10

12 Jan '10

The cisco Networking Academy for the Visually impaired out of Perth, Western Australia, is offering classes beginning in February, 2010. Classes being offered are I T Essentials 1 & CCNA Discovery. For more information & to apply, contact caviinfo(a)gmail.com You may also wish to visit www.ciscovision.org The site is under construction at present but does contain some useful information. Students from all over the world are welcome as lectures are done online using Ventrilo & are also recorded for listening for those unable to attend. -- Change the world--1 deed at a time Jackie McBride www.abletec.serverheaven.net Please join me Saturday, 11/7, on my walk against breast cancer by making a donation at: http://main.acsevents.org/goto/larkspur>

7 11