- Blind-sysadmins - lists.hodgsonfamily.org

team viewer
by Kathryn Jedynak 08 Nov '16

08 Nov '16

Hello all: The company I work for is thinking to buy team viewer. Does anyone use team viewer with screen readers? Do all of the versions work with screen readers, or is there a specific version that does. Thanks in advance. Kathryn

9 24

Confluence accessibility.
by Darragh Ó Héiligh 08 Nov '16

08 Nov '16

Hello, Im a tad stuck with Confluence from Atlassian. Different screen readers give me access to certain bits but not everything at once. · Nerrator with Edge is the most responsive when moving through menus etc. However It cant read any of the browse dialogues. It however will work with the drop down lists in the editor. · NVDA doesn't get stuck in the main edit area as much as other screen readers. · Jaws doesn't read the drop down menus in the editor but with the touch screen I can find the items. I just cant execute them. Also, I can read the items ... just about with a lot of trial and error in the browse dialogues but I cant activate them. · Voiceover on IOS does a reasonable job but the Confluence site doesn't support IOS so the problems aren't down the Voiceover. I've spent a lot of time trying to find ways around this so I'm throwing it out here. Have any of you used Confluence and if so, how do you access these browse pages? Nerrator calls them groups. The browse pages are used for browsing for files, templates, macros, links and even people so they are a vital component of the interface. I'm managing the team that are implementing this so it's really causing problems that I cant access key elements of the interface. Regards Darragh

2 4

Confluence accessibility.
by Darragh Ó Héiligh 08 Nov '16

08 Nov '16

Hello, Im a tad stuck with Confluence from Atlassian. Different screen readers give me access to certain bits but not everything at once. · Nerrator with Edge is the most responsive when moving through menus etc. However It cant read any of the browse dialogues. It however will work with the drop down lists in the editor. · NVDA doesn't get stuck in the main edit area as much as other screen readers. · Jaws doesn't read the drop down menus in the editor but with the touch screen I can find the items. I just cant execute them. Also, I can read the items ... just about with a lot of trial and error in the browse dialogues but I cant activate them. · Voiceover on IOS does a reasonable job but the Confluence site doesn't support IOS so the problems aren't down the Voiceover. I've spent a lot of time trying to find ways around this so I'm throwing it out here. Have any of you used Confluence and if so, how do you access these browse pages? Nerrator calls them groups. The browse pages are used for browsing for files, templates, macros, links and even people so they are a vital component of the interface. I'm managing the team that are implementing this so it's really causing problems that I cant access key elements of the interface. Regards Darragh

1 0

Hyper-V an update and questions.
by Darragh Ó Héiligh 07 Nov '16

07 Nov '16

Hello, I've given Hyper-V another serious try over the past day or so. I need feedback from others though as my testing has only gotten me so far. Findings: 1. Audio latency is reasonable. Not great but it will do. Note I only gave the machine 4GB of RAM and one processor so I may be unfair. It is going through a high end sound card though. 2. Enhanced session mode seems to be very workable. Control alt and left moves focus away from the guest consistently and control alt break takes you out of full screen mode. 3. The hardware and Hyper-V host settings are accessible. No problems there at all. 4. Capslock seems to be passed through to the guest all the time. This is really irritating. I wonder is there anything our friends in Microsoft can do about this? I prefer the laptop keyboard layout in screen readers because I keep my hands on the home keys all the time. I find it much more efficient. 5. One critical issue I'm encountering is I cannot get the hardware authorization dongle to work. I also cant activate Jaws. I think this is because the hardware ID is dynamic and the ILM authorization manager doesn't like it. 6. Again, another critical issue is that because the enhanced session uses elements of RDP, Jaws thinks that it is in an RDP session but it cant communicate with the locally running instance of Jaws to get it's authorization from. Therefore 40 minute mode is never available. When Jaws starts, it prompts for authorization. When authorization fails or I close the window, Jaws always shows a message saying that this copy of jaws is not authorized to run in a terminal services session. Here's my intended use case. I have hoped for this for years and in some ways, I can do this with VMware workstation but it's not quite what I want. InstallHyper-V 2016 server. I've two really powerful machines here so I have no shortage of computing resources to easily run what I need locally. I'll then run the various desktops and servers that I need on these machines. The idea is that I should never need to run an application on the host. If I'm testing something,I can create a temporary VM from a template and trash it when I'm done. I also have a few clients where it is not a good idea to connect to their network on a machine that I have not dedicated to their tasks. I generally have these starting and connecting to interfaces on my firewall that provide a VPN connection. With Hyper-V server , I'll get more performance from the guests compared to VMWare workstation as there will be less running on the host. I know that Jaws will install onto hyper-V server. I had to do this a few months ago. I don't want to use RDP authorization for Jaws on my local virtual machines because often I need to use RDP to access remote servers. Have any of you had any success or do you have any additional findings? Thanks Darragh

1 0

Hyper-V an update and questions.
by Darragh Ó Héiligh 07 Nov '16

07 Nov '16

Hello, I've given Hyper-V another serious try over the past day or so. I need feedback from others though as my testing has only gotten me so far. Findings: 1. Audio latency is reasonable. Not great but it will do. Note I only gave the machine 4GB of RAM and one processor so I may be unfair. It is going through a high end sound card though. 2. Enhanced session mode seems to be very workable. Control alt and left moves focus away from the guest consistently and control alt break takes you out of full screen mode. 3. The hardware and Hyper-V host settings are accessible. No problems there at all. 4. Capslock seems to be passed through to the guest all the time. This is really irritating. I wonder is there anything our friends in Microsoft can do about this? I prefer the laptop keyboard layout in screen readers because I keep my hands on the home keys all the time. I find it much more efficient. 5. One critical issue I'm encountering is I cannot get the hardware authorization dongle to work. I also cant activate Jaws. I think this is because the hardware ID is dynamic and the ILM authorization manager doesn't like it. 6. Again, another critical issue is that because the enhanced session uses elements of RDP, Jaws thinks that it is in an RDP session but it cant communicate with the locally running instance of Jaws to get it's authorization from. Therefore 40 minute mode is never available. When Jaws starts, it prompts for authorization. When authorization fails or I close the window, Jaws always shows a message saying that this copy of jaws is not authorized to run in a terminal services session. Here's my intended use case. I have hoped for this for years and in some ways, I can do this with VMware workstation but it's not quite what I want. InstallHyper-V 2016 server. I've two really powerful machines here so I have no shortage of computing resources to easily run what I need locally. I'll then run the various desktops and servers that I need on these machines. The idea is that I should never need to run an application on the host. If I'm testing something,I can create a temporary VM from a template and trash it when I'm done. I also have a few clients where it is not a good idea to connect to their network on a machine that I have not dedicated to their tasks. I generally have these starting and connecting to interfaces on my firewall that provide a VPN connection. With Hyper-V server , I'll get more performance from the guests compared to VMWare workstation as there will be less running on the host. I know that Jaws will install onto hyper-V server. I had to do this a few months ago. I don't want to use RDP authorization for Jaws on my local virtual machines because often I need to use RDP to access remote servers. Have any of you had any success or do you have any additional findings? Thanks Darragh

1 0

Supporting sighted people
by Ben Mustill-Rose 07 Nov '16

07 Nov '16

Hi all, I'll be supporting a sighted intern in December. At least that was what I thought would be happening until earlier today when I was told that he'd be starting on Monday. Does anyone have any suggestions as to how we can pear on things? He'll be using a Mac so VoiceOver is an option but I'd rather not as I want to be as unobtrusive as possible. The work is going to be typical devops stuff so a bit of programming and a bit of admin mainly over SSH. We make heavy use of GitHub for the programming side of things so I think I'll get him to work more or less independently then submit a pull request at which point we can discuss the code but I'm completely stumped about the admin side of things. All ideas very much appreciated. Cheers, Ben.

7 9

Supporting sighted people
by Ben Mustill-Rose 03 Nov '16

03 Nov '16

Hi all, I'll be supporting a sighted intern in December. At least that was what I thought would be happening until earlier today when I was told that he'd be starting on Monday. Does anyone have any suggestions as to how we can pear on things? He'll be using a Mac so VoiceOver is an option but I'd rather not as I want to be as unobtrusive as possible. The work is going to be typical devops stuff so a bit of programming and a bit of admin mainly over SSH. We make heavy use of GitHub for the programming side of things so I think I'll get him to work more or less independently then submit a pull request at which point we can discuss the code but I'm completely stumped about the admin side of things. All ideas very much appreciated. Cheers, Ben.

1 0

DD-WRT Installation
by David Mehler 01 Nov '16

01 Nov '16

Hello, Does anyone onlist have experience doing a DD-WRT installation on a router? If so, can you get back to me. Thanks. Dave.

4 8

Outlook 2016 and images
by Katherine Moss 01 Nov '16

01 Nov '16

Hey all, Maybe somebody has some input on this that I'm missing? I was sent an image from an iPhone,, and you know how Apple does that where the image is embedded into the email rather than being a separate attachment (though screen readers will often identify them as "attachments"). I was only able to get the image out by finding the message in Outlook on my phone and posting it up on Facebook that way, though I was hoping to save it via my computer. Does anybody know of an accessible way to get these images out via Outlook 2016 desktop and save them, or are we stuck using our phones? More pressing is when I have this situation at work; people will send me screenshots to attach to tickets,, and I end up having to save the actual message encompassing the image as a .msg file to attach to the ticket. All because I can't seem to discover the proper place to click to save the image in its native format.

1 0

Outlook 2016 and images
by Katherine Moss 01 Nov '16

01 Nov '16

Hey all, Maybe somebody has some input on this that I'm missing? I was sent an image from an iPhone,, and you know how Apple does that where the image is embedded into the email rather than being a separate attachment (though screen readers will often identify them as "attachments"). I was only able to get the image out by finding the message in Outlook on my phone and posting it up on Facebook that way, though I was hoping to save it via my computer. Does anybody know of an accessible way to get these images out via Outlook 2016 desktop and save them, or are we stuck using our phones? More pressing is when I have this situation at work; people will send me screenshots to attach to tickets,, and I end up having to save the actual message encompassing the image as a .msg file to attach to the ticket. All because I can't seem to discover the proper place to click to save the image in its native format.

1 0