- Blind-sysadmins - lists.hodgsonfamily.org

Re: Windows ssh Client
by David Mehler 05 Jun '19

05 Jun '19

Hello, It's been a long day, so apologies if this message has already been sent, or I might have just thought about doing so. To any users of SecureCRT 8.x.x 8.5.4 would be best, but i'll take anyone running any 8.x version, and who is connecting to a Linux/Unix Openssh 7.6 to 7.8 server, again 7.8 prefered, I've got a security question for you. What does your configuration on SecureCRT look like and the server configuration your connecting to? I'm trying to get the below working with SecureCRT. This is a snipet of my sshd configuration: # Modern configuration HostKey /etc/ssh/ssh_host_ed25519_key HostKeyAlgorithms ssh-ed25519 KexAlgorithms curve25519-sha256(a)libssh.org,diffie-hellman-group-exchange-sha256 # also added curve25519-sha256 didn't solve the issue MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,umac-128@openssh.com # Ciphers and keying Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr Whenever I have this configuration enabled and atempt to connect with SecureCRT 8.5.4, I get a message that a key exchange algorithm could not be established and it shows the algorithms the server supports, the entries in the KexAlgorithm line above. Now googling led me to this faq which tells me that the above key exchange algorithms should most definitely be working: https://forums.vandyke.com/showthread.php?t=13272 On the Securecrt side: under edit default session, ssh2, key exchange list box unmodified under edit default session, ssh2, advanced, cipher listbox, mac listbox, both unmodified I am perplexed. I'm trying to tighten down my sshd configuration make it use more modern Ciphers, Protocols, Macs, and key exchanges. I'm using this as a guide only: https://stribika.github.io/2015/01/04/secure-secure-shell.html if anyone has this specific configuration going, or has suggestions on securing/hardening/tightening please let me know. Thanks. Dave. On 6/3/19, Andrew Hodgson <andrew(a)hodgson.io> wrote: > Hi, > > They've also included Curl! > > Andrew. > > -----Original Message----- > From: Billy Irwin <billy.irwin(a)outlook.com> > Sent: 03 June 2019 20:42 > To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> > Subject: [Blind-sysadmins] Re: Windows ssh Client > > Guys, > > I thought I would also share that scp is in the command prompt as well. It > is nice that this is included now. I still like WinSCP too though. > > Best, > > billy > > -----Original Message----- > From: Simon Eigeldinger <simon.eigeldinger(a)vol.at> > Sent: Sunday, June 2, 2019 12:28 PM > To: blind-sysadmins(a)lists.hodgsonfamily.org > Subject: [Blind-sysadmins] Re: Windows ssh Client > > Hi Dave, > > They basically compiled OpenSSH to windows. > In the old days i did that myself. > though they seem to use an older version of LibreSSL. > > Greetings, > Simon > > > Am 02.06.2019 um 16:41 schrieb David Mehler: >> Hello Everyone, >> >> Thanks for your replies. Honestly I've never had a lot of success >> using Putty, getting it to focus or track what i'm doing especially in >> a file I'm trying to edit, this is a welcome change. >> >> Is this client Microsoft's own implementation or did they bundle >> Openssh with windows? And can it handle multiple authentication types, >> public key, password etc >> >> Thanks. >> Dave. >> >> >> On 6/2/19, Andrew Hodgson <andrew(a)hodgson.io> wrote: >>> Hi, >>> >>> I didn't know about this either, but it comes with Windows now either >>> with version 1809 or 1903. Won't be using Putty from now on. >>> >>> Andrew. >>> >>> -----Original Message----- >>> From: David Mehler <dave.mehler(a)gmail.com> >>> Sent: 01 June 2019 15:16 >>> To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> >>> Subject: [Blind-sysadmins] Re: Windows ssh Client >>> >>> Hi, >>> >>> What built in ssh client? >>> >>> Thanks. >>> Dave. >>> >>> >>> On 6/1/19, Bill Dengler <codeofdusk(a)gmail.com> wrote: >>>> What about the built-in ssh client? >>>> >>>> Bill >>>> >>>> Sent from my iPhone >>>> >>>>> On Jun 1, 2019, at 09:04, David Mehler <dave.mehler(a)gmail.com> wrote: >>>>> >>>>> Hello, >>>>> >>>>> I'm using SecureCRT Version 6.2.3, I know that's quite old, but >>>>> until I went and atempted to harden my vps server's Openssh 7.8 >>>>> setup it worked fine. This version does not support the more >>>>> modern/advanced cryptographic hashes, macs, and kex algorithms. This I >>>>> need to change. >>>>> >>>>> I've tried SecureCRT 8.x but I've found it not accessible and also >>>>> does not support the secure setup I'm wanting. >>>>> >>>>> Is Tteraterm accessible/does it support secure ciphers? >>>>> >>>>> Thanks. >>>>> Dave. >>>>> _______________________________________________ >>>>> Blind-sysadmins mailing list -- >>>>> blind-sysadmins(a)lists.hodgsonfamily.org >>>>> To unsubscribe send an email to >>>>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>>> _______________________________________________ >>>> Blind-sysadmins mailing list -- >>>> blind-sysadmins(a)lists.hodgsonfamily.org >>>> To unsubscribe send an email to >>>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>>> >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> >> _______________________________________________ >> Blind-sysadmins mailing list -- >> blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> > > --- > Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. > https://www.avast.com/antivirus > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org >

2 2

Spectrum Wave2 router and Sip?
by David Mehler 04 Jun '19

04 Jun '19

Hello, I apologize for the multiple posting, but I'm hoping someone out there can help me. Does anyone have Spectrum as their internet provider? If so, do you have their newest Wave2 router? It's the RAC2V1A Arris (TR4400-AC). If all this is yes or you can help me anyway, I am trying to get out to my server and use asterisk. My internet server is cloud based and has a public IP address. My IP here is also public and maybe static I don't know it hasn't changed in a while, but the router see above gives out 192.x.x.x addresses as it should. Here's the question, the point to all this, I am trying to get sip going so I can do more than connect and disconnect and can actually here some audio. There's some passthrough options under advanced, > wan, > nat passthrough, I've got the relevant ones on they were on by default I dchanged them to off didn't make a difference so I returned them to the default values. My current theory and I'm not sure why this is needed with the passthrough is I have to forward a port range from the router to my phone, which has a dhcp-statically assigned ip address. How do you navigate that form? It is a nightmare and I don't know the values to put in it. Any help appreciated, if you think necessary please email privately. Thanks. Dave.

2 2

Re: Windows ssh Client
by Andrew Hodgson 03 Jun '19

03 Jun '19

Hi, They've also included Curl! Andrew. -----Original Message----- From: Billy Irwin <billy.irwin(a)outlook.com> Sent: 03 June 2019 20:42 To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> Subject: [Blind-sysadmins] Re: Windows ssh Client Guys, I thought I would also share that scp is in the command prompt as well. It is nice that this is included now. I still like WinSCP too though. Best, billy -----Original Message----- From: Simon Eigeldinger <simon.eigeldinger(a)vol.at> Sent: Sunday, June 2, 2019 12:28 PM To: blind-sysadmins(a)lists.hodgsonfamily.org Subject: [Blind-sysadmins] Re: Windows ssh Client Hi Dave, They basically compiled OpenSSH to windows. In the old days i did that myself. though they seem to use an older version of LibreSSL. Greetings, Simon Am 02.06.2019 um 16:41 schrieb David Mehler: > Hello Everyone, > > Thanks for your replies. Honestly I've never had a lot of success > using Putty, getting it to focus or track what i'm doing especially in > a file I'm trying to edit, this is a welcome change. > > Is this client Microsoft's own implementation or did they bundle > Openssh with windows? And can it handle multiple authentication types, > public key, password etc > > Thanks. > Dave. > > > On 6/2/19, Andrew Hodgson <andrew(a)hodgson.io> wrote: >> Hi, >> >> I didn't know about this either, but it comes with Windows now either >> with version 1809 or 1903. Won't be using Putty from now on. >> >> Andrew. >> >> -----Original Message----- >> From: David Mehler <dave.mehler(a)gmail.com> >> Sent: 01 June 2019 15:16 >> To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> >> Subject: [Blind-sysadmins] Re: Windows ssh Client >> >> Hi, >> >> What built in ssh client? >> >> Thanks. >> Dave. >> >> >> On 6/1/19, Bill Dengler <codeofdusk(a)gmail.com> wrote: >>> What about the built-in ssh client? >>> >>> Bill >>> >>> Sent from my iPhone >>> >>>> On Jun 1, 2019, at 09:04, David Mehler <dave.mehler(a)gmail.com> wrote: >>>> >>>> Hello, >>>> >>>> I'm using SecureCRT Version 6.2.3, I know that's quite old, but >>>> until I went and atempted to harden my vps server's Openssh 7.8 >>>> setup it worked fine. This version does not support the more >>>> modern/advanced cryptographic hashes, macs, and kex algorithms. This I need to change. >>>> >>>> I've tried SecureCRT 8.x but I've found it not accessible and also >>>> does not support the secure setup I'm wanting. >>>> >>>> Is Tteraterm accessible/does it support secure ciphers? >>>> >>>> Thanks. >>>> Dave. >>>> _______________________________________________ >>>> Blind-sysadmins mailing list -- >>>> blind-sysadmins(a)lists.hodgsonfamily.org >>>> To unsubscribe send an email to >>>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> >> _______________________________________________ >> Blind-sysadmins mailing list -- >> blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> _______________________________________________ >> Blind-sysadmins mailing list -- >> blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> > _______________________________________________ > Blind-sysadmins mailing list -- > blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org > --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus _______________________________________________ Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org To unsubscribe send an email to blind-sysadmins-leave(a)lists.hodgsonfamily.org _______________________________________________ Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org To unsubscribe send an email to blind-sysadmins-leave(a)lists.hodgsonfamily.org

1 0

Re: Windows ssh Client
by David Mehler 03 Jun '19

03 Jun '19

Hello Everyone, Thanks for your replies. Honestly I've never had a lot of success using Putty, getting it to focus or track what i'm doing especially in a file I'm trying to edit, this is a welcome change. Is this client Microsoft's own implementation or did they bundle Openssh with windows? And can it handle multiple authentication types, public key, password etc Thanks. Dave. On 6/2/19, Andrew Hodgson <andrew(a)hodgson.io> wrote: > Hi, > > I didn't know about this either, but it comes with Windows now either with > version 1809 or 1903. Won't be using Putty from now on. > > Andrew. > > -----Original Message----- > From: David Mehler <dave.mehler(a)gmail.com> > Sent: 01 June 2019 15:16 > To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> > Subject: [Blind-sysadmins] Re: Windows ssh Client > > Hi, > > What built in ssh client? > > Thanks. > Dave. > > > On 6/1/19, Bill Dengler <codeofdusk(a)gmail.com> wrote: >> What about the built-in ssh client? >> >> Bill >> >> Sent from my iPhone >> >>> On Jun 1, 2019, at 09:04, David Mehler <dave.mehler(a)gmail.com> wrote: >>> >>> Hello, >>> >>> I'm using SecureCRT Version 6.2.3, I know that's quite old, but until >>> I went and atempted to harden my vps server's Openssh 7.8 setup it >>> worked fine. This version does not support the more modern/advanced >>> cryptographic hashes, macs, and kex algorithms. This I need to change. >>> >>> I've tried SecureCRT 8.x but I've found it not accessible and also >>> does not support the secure setup I'm wanting. >>> >>> Is Tteraterm accessible/does it support secure ciphers? >>> >>> Thanks. >>> Dave. >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> _______________________________________________ >> Blind-sysadmins mailing list -- >> blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org >

3 2

Re: Windows ssh Client
by Simon Eigeldinger 02 Jun '19

02 Jun '19

Hi, They are using OpenSSH since i guess 1803 or so. $ ssh -V OpenSSH_for_Windows_7.7p1, LibreSSL 2.6.5 Greetings, Simon Am 02.06.2019 um 15:10 schrieb Andrew Hodgson: > Hi, > > I didn't know about this either, but it comes with Windows now either with version 1809 or 1903. Won't be using Putty from now on. > > Andrew. > > -----Original Message----- > From: David Mehler <dave.mehler(a)gmail.com> > Sent: 01 June 2019 15:16 > To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> > Subject: [Blind-sysadmins] Re: Windows ssh Client > > Hi, > > What built in ssh client? > > Thanks. > Dave. > > > On 6/1/19, Bill Dengler <codeofdusk(a)gmail.com> wrote: >> What about the built-in ssh client? >> >> Bill >> >> Sent from my iPhone >> >>> On Jun 1, 2019, at 09:04, David Mehler <dave.mehler(a)gmail.com> wrote: >>> >>> Hello, >>> >>> I'm using SecureCRT Version 6.2.3, I know that's quite old, but until >>> I went and atempted to harden my vps server's Openssh 7.8 setup it >>> worked fine. This version does not support the more modern/advanced >>> cryptographic hashes, macs, and kex algorithms. This I need to change. >>> >>> I've tried SecureCRT 8.x but I've found it not accessible and also >>> does not support the secure setup I'm wanting. >>> >>> Is Tteraterm accessible/does it support secure ciphers? >>> >>> Thanks. >>> Dave. >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> _______________________________________________ >> Blind-sysadmins mailing list -- >> blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to blind-sysadmins-leave(a)lists.hodgsonfamily.org > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to blind-sysadmins-leave(a)lists.hodgsonfamily.org > --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus

1 0

Windows ssh Client
by David Mehler 02 Jun '19

02 Jun '19

Hello, I'm using SecureCRT Version 6.2.3, I know that's quite old, but until I went and atempted to harden my vps server's Openssh 7.8 setup it worked fine. This version does not support the more modern/advanced cryptographic hashes, macs, and kex algorithms. This I need to change. I've tried SecureCRT 8.x but I've found it not accessible and also does not support the secure setup I'm wanting. Is Tteraterm accessible/does it support secure ciphers? Thanks. Dave.

5 6

accessible open source webmail client
by David Mehler 01 Jun '19

01 Jun '19

Hello, Does anyone know of a screen-reader friendly, current, open-source webmail client? I'm looking for something that is accessible that I can deploy as a hook in to a new linux-basedemail server. Thanks. Dave.

5 8

rdp and sessions
by mattias jonsson 29 May '19

29 May '19

how to connect directly to a rdp session instead to open a new one in ex xp with 2003 server you do: mstsc.exe /console this is not working in newer system mstsc.exe /admin not working

1 0

Re: Mesh Network, Raspberry Pi, IP Camera setup, Night Surveillance, suggestions needed
by David Mehler 23 May '19

23 May '19

Hello Andrew, Thanks for your reply. In answer to your question, yes I've got wireless issues, some areas that have drop offs. That's why I was thinking mesh. How much did you pay for those orbis? Thanks. Dave. On 5/23/19, Andrew Hodgson <andrew(a)hodgson.io> wrote: > Hi, > > I think you should treat these as separate projects. Do you know you have > wireless issues at your current location? I used a mesh network in my > rented property (Netgear Orbi) but it was quite expensive. Depending on > what you are experiencing at the current location means you may need to > spend less but also some systems have specific features or lack of features > so may steer you in a direction. > > My research was done in 2017 and at that time I was looking at 3 systems, > the Google Wifi, the Amplifi system from Ubiquity and the Netgear Orbi. > > I went with the Orbi for the following reasons: > > - Multiple ethernet ports on back of each sattelite; > - Configuration via browser and not iPhone app (amazingly a lot of these > only have app support which is weird); > - Multiple different units for different situations (like wallplug units and > larger units depending on area required); > - Better wireless support (the Google Wifi came out bottom in this for me). > - Ability to run Orbi in access point only mode. > > In the end I went with the main Orbi unit (RBR50) and 2 RBS50 sattelites. > That was not enough to cover one dead spot, so I got an RBW30 wallplug to > act as an extender in this area which boosted reception in a long hallway, > which then allowed the sattelite in the far bedroom to pick up a good > signal. I did try to do without the RBW30 a couple of times but each time > it really struggled to get signal across to the one sattelite in the far > bedroom. > > I am going to sell this lot at some point now because in my new flat a > single ISP provided router covers everything for me. I may switch that out > at some point but that is for another day and it will be for a different > type of router. > > Andrew. > ________________________________________ > From: David Mehler [dave.mehler(a)gmail.com] > Sent: 22 May 2019 18:23 > To: Blind sysadmins list > Subject: [Blind-sysadmins] Re: Mesh Network, Raspberry Pi, IP Camera setup, > Night Surveillance, suggestions needed > > Hello, > > Thanks. I was going to run Linux on the Raspberry Pi. > > I'll check out the camera. > > Thanks. > Dave. > > > On 5/22/19, Anatoliy Shudrya <anatoliyshudrya(a)hotmail.com> wrote: >> Here is more information about the camera: >> >> https://www.amazon.com/All-new-Blink-Outdoor-Security-included/dp/B07MMZ2LT… >> >> My camera's batteries lasted for about 8 months only because I have >> configured all settings on the highest quality, extended video clip, >> enhanced IR etc., but they promise about 2 years out of 2 AA lithium >> batteries. I don't have external solar charger or USB charger just yet, >> that >> is something I want to obtain soon. The little cam is definitely >> unobtrusive. >> >> Are you going to run Linux or Windows image on a raspberry PI? There is >> open >> source surveillance software for windows OS called iSpy, seemed to be >> somewhat accessible last time I installed it on my PC. >> https://www.ispyconnect.com/default.aspx >> Also, I heard Ubiquity video surveillance line of products has some >> decent >> priced options, maybe worth checking them out; although, can't vouch for >> the >> accessibility of their NVR software. >> >> It really depends what you want with your system, many different options >> are >> there, budget friendly makeshift system, all-in-one package, and more >> reliable options, they are of course more costly. The more components to >> your system, the more babysitting you'd need to do in my opinion. >> >> The Asus RT AC88U has 4 detachable antennas. >> >> Kind Regards >> >> Anatoliy >> >> >> >> -----Original Message----- >> From: David Mehler <dave.mehler(a)gmail.com> >> Sent: Tuesday, May 21, 2019 12:13 PM >> To: Blind sysadmins list <blind-sysadmins(a)lists.hodgsonfamily.org> >> Subject: [Blind-sysadmins] Re: Mesh Network, Raspberry Pi, IP Camera >> setup, >> Night Surveillance, suggestions needed >> >> Hello Everyone, >> Anatoliy thank you for your reply. >> >> I was thinking Raspberry Pi boxes because I've got about four of them and >> I >> could make three available for this project. I'm not commited to it, but >> I >> thought that would ease startup costs? >> >> I'm an Android user and so I'd need something with an android accessible >> app. I'm also not to keen on trusting cloud storage, so I've got some >> multi-terrabyte USB external drives I can use for video storage, that's >> why >> I mentioned that. >> >> With regards Amazon's Blink XT camera I hadn't heard of it I will look it >> up. How long do batteries last? How unobservable is it? I'm wanting >> something small like a pinpoint camera that's what I envision, so that it >> is >> not readily visible. What kind of batteries does it take? >> >> Do you have yours set up with either a solar charger or external battery >> pack? How much did those run you? >> >> As I said my router is in the basement, it use to be an Asus RT-N66U >> before >> that died and my cable provider gave me one, i'd love to give it back to >> them. Your RT AC88U is mesh capable but you've not tested it, do you know >> if >> it has removable antennas? I've got some 9Dbi long range removable >> antennas >> I bought for my 66u and which i'd love to put back in to service. I don't >> have my house wired up which is a major bummer, so that's why I was >> proposing mesh. >> >> Any other thoughts very helpful. >> >> Thanks. >> Dave. >> >> >> On 5/21/19, Anatoliy Shudrya <anatoliyshudrya(a)hotmail.com> wrote: >>> Hello David, >>> >>> Why raspberry PI? Have you considered Blink XT camera from Amazon? >>> WIFI capable, no NVR/DVR required, almost unlimited cloud storage. It >>> is battery operated and batteries do go down quickly if extended clip >>> size selected but it can be fixed with a solar charger or external USB >>> power supply. It is very easy setup, quite accessible with voice over >>> on IOS. It is dirt cheep on Amazon about $120 and sometimes during >>> sales for $80. HD quality, free cloud storage, accessible on the >>> iPhone, I am happy with the one I have setup for my front door. Mesh >>> routers: I have Asus RT AC88U and it has mesh capabilities, but I >>> never tested it because my house is all wired with CAT6 to each room. >>> >>> Anatoliy >>> >>> >>> >>> -----Original Message----- >>> From: David Mehler <dave.mehler(a)gmail.com> >>> Sent: Tuesday, May 21, 2019 7:44 AM >>> To: blind-sysadmins <blind-sysadmins(a)lists.hodgsonfamily.org> >>> Subject: [Blind-sysadmins] Mesh Network, Raspberry Pi, IP Camera >>> setup, Night Surveillance, suggestions needed >>> >>> Hello, >>> If anyone has any suggestions on mesh network products and setup, >>> Raspberry Pi IP camera for surveillance setup, and integration please >>> let me know. I'm needing some advice. >>> >>> My situation is this, I've got an area of my backyard that is needing >>> to have an IP-based surveillance camera pointed at it to capture >>> videos of any intruders. I've got several Raspberry Pis, and am >>> wanting to use them in a video surveillance setup. My place has the >>> cable modem and a router in the basement, then the main floor, then an >>> upstairs area. I'm already thinking to support this setup of video >>> surveillance I'm going to need to go mesh, put a wireless setup in >>> each room I've got occational drops that I'm going to need to correct >>> and >>> thinking mesh might be the way. >>> >>> Once I get the mesh then going to get a Raspberry Pi camera and hook >>> that to a pi then to an external drive for file storage. I'm thinking >>> a 3 to 5 day rotation time, is this feasible? >>> >>> I'm also going to need a way to examine the files see if there's >>> something other than blankness in them. >>> >>> Lastly, and this is a big one, i'd prefer not to break the bank on this. >>> >>> If anyone has any suggestions please let me know. >>> >>> Thanks. >>> Dave. >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> _______________________________________________ >>> Blind-sysadmins mailing list -- >>> blind-sysadmins(a)lists.hodgsonfamily.org >>> To unsubscribe send an email to >>> blind-sysadmins-leave(a)lists.hodgsonfamily.org >>> >> _______________________________________________ >> Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> _______________________________________________ >> Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org >> To unsubscribe send an email to >> blind-sysadmins-leave(a)lists.hodgsonfamily.org >> > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org > _______________________________________________ > Blind-sysadmins mailing list -- blind-sysadmins(a)lists.hodgsonfamily.org > To unsubscribe send an email to > blind-sysadmins-leave(a)lists.hodgsonfamily.org >

2 1

Mesh Network, Raspberry Pi, IP Camera setup, Night Surveillance, suggestions needed
by David Mehler 23 May '19

23 May '19

Hello, If anyone has any suggestions on mesh network products and setup, Raspberry Pi IP camera for surveillance setup, and integration please let me know. I'm needing some advice. My situation is this, I've got an area of my backyard that is needing to have an IP-based surveillance camera pointed at it to capture videos of any intruders. I've got several Raspberry Pis, and am wanting to use them in a video surveillance setup. My place has the cable modem and a router in the basement, then the main floor, then an upstairs area. I'm already thinking to support this setup of video surveillance I'm going to need to go mesh, put a wireless setup in each room I've got occational drops that I'm going to need to correct and thinking mesh might be the way. Once I get the mesh then going to get a Raspberry Pi camera and hook that to a pi then to an external drive for file storage. I'm thinking a 3 to 5 day rotation time, is this feasible? I'm also going to need a way to examine the files see if there's something other than blankness in them. Lastly, and this is a big one, i'd prefer not to break the bank on this. If anyone has any suggestions please let me know. Thanks. Dave.

3 5